Re: Well, That wasn't a good way to start the day

Posted by PJH on January 19, 2011 at 19:24:11 from (72.69.102.34):

In Reply to: Well, That wasn't a good way to start the day posted by kruser on January 19, 2011 at 17:09:15:

Jim, we had a Hyster finish roller drop a linkage pin on the shuttle bar and the operator ran over one of our density machines. The materials guy called in about the accident and in a very short time, a helicopter landed in the median, two suited up guys with geiger counters got out and basicly shut down the whole paving operation. They wouldn't even let the operator get his lunch bucket off of the roller.

And another incident - the materials guy, at the end of the day, always hung his badge on the density machine so he wouldn't misplace it. When they sent it in for testing, it set off a bunch of alarms for absorbed radiation for the operator.

And another training session for him too.

Paul

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]