Posted by trucker 40 on January 28, 2011 at 19:06:42 from (69.152.39.104):
In Reply to: need motor F -600 posted by j hetkemper on January 28, 2011 at 18:36:54:
The engines for a big truck are different internally from the car and pickup ones.I dont think pistons or crank or cam will interchange but the bolt pattern might be the same.The Flywheel might be different I cant remember.It seems like the block for big trucks is taller.It might be like a police interceptor block,maybe.I think the heads will work,pushrods probably wont Something about the front of the engine might be different.The way it mounts in a big truck might be different. 330 was a truck engine,then 361 and 391 were truck engines.I havent worked on a 330 but no parts will interchange between a 361 and 391 except the heads.Cranks and pistons are different.Probably nothing will work on a 330. A 360 or a 390 or 352 were used in cars and pickups and station wagons.390 is the best of those and probably would bolt to the transmission.You would have to ask Ford whether the flywheel would work or not.Maybe if you use the one that comes on the 390,and then you would need to use the 390 bellhousing which might or might not bolt to the transmission.Im thinking it will work.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Jerry D. Coleman. How many of you can sit there and say that you have plowed with a mule? Well I would say not many, but maybe a few. This story is about the day my Grandfather Brown (true name) decided along with my parents to purchase a new Ford tractor. It wasn't really new except to us. The year was about 1967 and my father found a good used Ford 601 tractor to use on the farm instead of "Bob", our old mule. Now my grandfather had had this mule since the mid 40's and he was getting some age on him. S
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
