The sales lit for the 6620 (yellow roof cab) lists the following:
Corn heads: 3W 4N 4W 5N 5W 6N Numbers on the heads are 344, 443, 444, 543, 544, 643. The 6 row wide, the 644, is not recommended. Older heads will have to have the LH standard trimmed if you have a reverser on your feeder house. On the later heads, the LH standard was moved leftward to accomodate the reverser.
Grain Tables 200 series grain heads are used. (900 can also be used) 13, 15, 16, 18, 20, and 22 footers. The head numbers are: 213, 215, 216, 218, 220, and 222. If the heads are equiped with floating cutter bars, (flex heads) there were two types of header height control. Early was a simple 3 wire system with a raise and with a lower switch on the head. Later was called Dial-A-Matic (DAM) which was a 3 position switching arrangement where 3 different heights could be selected for how close the head shaved the ground.
If you have a Titan II 6620 (green cab roof), the 6W corn head is allowed, the 644, along with the next size larger grain table, the 24 ft 224.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
