Posted by LOU from Wi. on February 15, 2011 at 10:54:46 from (174.124.110.80):
In Reply to: Re: Still searching posted by GordoSD on February 15, 2011 at 06:25:13:
Gordo. To tell the truth, If we were farmers with a lot of ground to work, a second tractor would be in line.We got the 706 with just pulling a wagon was the plan. Wood is necessary for our heat source. Called around to the mfg that Old Roy gave us and they did list em buttttttttt no longer mfg em. I guess the aftermarket hitch caused so much stress ,it would tear up the 3 point off. Can't see buying another tractor just to do our garden plots here at home. Way to much expense for us. Some one suggested we look for a disc to pull behind our 706 (draw bar )hook up. Found one real close by.less then 40 miles away. Farmer is going to sell it because it's to small for his operation. Want's what we can afford at this time.Gonna look at it tomorrow (8 ft disc) one chipped blade or so he says. Gonna LOOK before we leap.Son says it will do the gardens(weight added to disc) should be o.K.if we do get it. We will post the results here. I personally want to thank each and every one here that responded to our needs .to a fellow tractor owner who doesn't farm and knows squat about what's -what when it comes to equiptment needing a 3 point hitch.There are other options on this post we will be looking into if this falls through. Warmest regards, LOU.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
