Re: Re: 1010 drive train
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Rick B. on May 05, 1998 at 15:19:59:
In Reply to: Re: 1010 drive train posted by weasel_s on May 05, 1998 at 07:03:37:
: : none of the 4 forward or 1 reverse gears will engage without excessive grinding, is this a transmission problem or a clutch problem? : IT COULD BE THAT THE SHIFTING FORK IS WORN BAD, NOT LETTING THE GEARS GO ALL THE WAY TO WHERE THEY ARE SUPPOSE TO GO
> A good bet is that your clutch is either shot, or stuck to the pressure plate or flywheel, or both. THis is caused by moisture and long periods of inactivity. You probably don't notice any difference in pedal effort. With tractor SHUT OFF, engage pto, depress clutch, and see if pto shaft turns freely. If not, clutch is stuck. I am assuming your 1010 has trans driven PTO without a 2stage clutch. Post back if you find clutch stuck. good luck, Rick B.
Follow Ups:
Post a Followup
|
