Posted by Ken Macfarlane on February 28, 2011 at 07:14:29 from (156.34.142.102):
In preparation for a storm this weekend I replaced the bent adjustable 3 point lift rod on my little 50 hp hydrostatic. I do all my snowblowing in this tractor with a 1970's 7 ft Lucknow blower and it works really well. Unfortunately I galled some female threads that I don't have a tap for and couldn't get the parts.
No problem, the blower was already off for the repairs. I plug in the 100 hp Massey and charge the battery. Fire it up late in the day no problem even though its been parked 5 months. I'm a bit excited, never blown snow with it, and its got 40 kmh gears which should speed up my route.
Get the blower on, head out to test it out, 7 ft barely catches the tracks from the big Michellins but its alright. Shut it off to chat with a neighbour. Won't start. Dead battery. Hmm, Date stamp is Jan 2009 on it, charge it up, check alternator. Not charging, belt is loose and alt is adjusted all the way. Hood and grill guard are frozen in several inches of ice locking everything out of reach. I grab some jumpers and put a new battery up in the cab with me with leads to the jumper posts.
Head out again after the snowfall, blow a shear pin on first driveway, no rocks. Ok bit more torque on this one, I'll be careful not to load it up. Boom, shear pin on next driveway. Grumble.
Got the other 10 or so done, head to my last one that is 30 mins drive from home. Get one pass up the half mile driveway, try to clean up the improptu snowmobile trail the neighbours have started on the driveway, boom, shaft is spinning crazy even after I kick the pto off, the weld had come apart at the shear bushing, threw the circlip and fallen in two. crud. I vice grip it back together and plow the rest of the driveway with the loader (which the owner won't be happy to see!).
I'll be happy when my little tractor is back up, it put 100 hours on the blower this winter with only one shear pin and a broken chain.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1951 Farmall H - by The Red (John Fritz). I have been a collector of Farmall tractors since 1990 when I first obtained part of the family farm in Eastern Indiana. My current collection includes a 1938 F20, 1945 H, 1946 H, and the recently purchased 1951 H. This article will focus on what I encountered and what I did to bring the 1951 NEAR DEATH Farmall H back to life.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
