Posted by Cat parts on March 24, 2011 at 13:48:35 from (68.149.56.30):
In Reply to: Re: Dealer rant AGAIN posted by Fixerupper on March 24, 2011 at 13:20:21:
Totally agree on Cat. They were a problem a couple years ago when Finning tried to break the union and moved the parts out of their warehouse into a third party warehouse that was non union. They still use a logistics company for their warehouse but they've sorted things out and parts are back on line. If they don't have the part in stock, they will locate what warehouse it's in and tell you what time it will be shipped and what time it will be arriving, usually the next day! They also have parts for old machines. They are pricey but they are available. I know a guy who bought a 1947 D4 instead of a newer TD9 because he can go right to Cat for most of the parts he needs. JD industrial parts pail in comparison. A lot of parts for 350 and 450 crawlers built up to 1987 are no longer available and there's still a lot of these machines working or could be if parts were available. JD parts usually take about 4 days if they're available. I've found Agco to be pretty good for MF parts as well.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
