Belt - Water Pump / Alternator - For John Deere tractor models 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2750, 3120, 5103, 5104, 5200, 5203, 5204, 5300, 5400, Compatible with John Deere Hay Cutting (s) 3430, 3830, Replaces John Deere OEM number R73784, CDX14020A, .688" x 53.3" REC, (Item #: 122104)$21.70
Brakes
Brake Actuating Disc - For John Deere tractor models 1830 (s/n 301446-later), 2040, 2240, 2350, 2550, Replaces John Deere OEM number L33483, 12.044" O.D., 8.663" I.D., (Item #: 160347)$147.65
Brake Actuating Plate, Used - For John Deere tractor models 1030 (s/n 300750-later), 1130 (s/n 300750-later), 1630 (s/n 300750-later), 1641, 1641F, 1830 (s/n 301446 - later), 2030 (s/n 301746-later), 2040 (s/n 305840 - later), 2240 (s/n 305314 - later), 2251, 2251N, 2351, 2541, 2651, 2951, 3351, 3651, Replaces John Deere OEM number L56247, L33947, Outside Diameter: 12.170", Inside Diameter: 8.355", 6mm Steel, For a new version of this item use Item #: 151860, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 451860)$48.01
Brake Disc, Used - For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2040 (s/n 305839-earlier), 2240 (s/n 305313-earlier), 2440 (s/n 340999-earlier), Compatible with John Deere Construction and industrial models 210, 300, 300D, 301, 302A, 310, 310A, 310B, 310C (s/n 747742-later), 310D, 315, 315C (s/n 761934-later), 315CH (s/n 747038-later), 315D, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D (s/n 796854-earlier), 415, 415B, 480, 480A, 480B, 480C, 482C (s/n 747742-later), 510B, 510C, 510D (s/n 796854-earlier), 515, 515B, Replaces John Deere OEM number AT63106, AT22034, AT26290, AT315888, Spline: 12, O.D.: 12", For a new version of this item use Item #: 114741, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498784)$53.01
Brake Pedal Bushing - This bushing measures 0.690 inside diameter, 0.750 inches outside diameter, and is 1.215 inches long. For the following models: 820 (3cylinder), 830 (3cylinder), 1020, 1030, 1520, 1530, 1630, 2020, 2030, 2040 (serial number 430000 and up, 2040 (Utility serial number 350000 and up), 2130, 2150, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 7520. (Item #: 126142, Ref: B177R)$9.00
Brake Plate - 12 teeth, 12.00" O.D.. For tractor models 1020, 1520, 1530, 2020, 2030, (2040 SN# up to 305839), (210C SN# 747742 and up), (2240 SN# up to 305313), (2440 SN# up to 340999), 300B, 820, 830. Replaces AT26290, AT22034. (Item #: 114741, Ref: AT63106)$99.00
Brake Plate - 12.044" O.D., 8.663" I.D.. For tractor models 820, 830, 1020, 1520, 1530, 2020, (2030 SN# up to 187300), (2040 SN# up to 305839), (2240 SN# up to 305313). T38063, T46728. (Item #: 122116, Ref: L31016)$106.00
Clutch Alignment Tool - 1" x 15 and 1-1/2" x 23 Spline - For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2630, 2640, 2650, 2850, Compatible with John Deere Construction and industrial models 401A, 401B, 401C, 1st spline: 1" 15 spline, 2nd spline: 1-1/2" 23 spline, Pilot Diameter: .590", (Item #: 156040)$28.70
Clutch Control Valve Cover Gasket - Used on John Deere Tractors with independent PTOs, this Clutch Control Valve Cover Gasket replaces L33342, R234266 (Item #: 161808, Ref: R234266)$2.20
Clutch Disc 10 Inch - This is 10 inch organic, spring loaded disc with a 20 spline, 1-5/16 inch hub. It is used on Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410) Replaces AT21669, AT21665, RE33891, AL24059 (Item #: 166097, Ref: AL71088)$112.00
Clutch Fork, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040 (s/n: 349999-earlier), 2130, 2150, 2155, 2240 (s/n: 349999-earlier), 2350, 2355, 2440, 2630, 2640, 3030, 3120, 3130, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 655, 655B, 750, 750B, 755, 755A, 755B, 850, 850B, 855, Replaces John Deere OEM number T21999, For a new version of this item use Item #: 173105, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442726)$66.01
Clutch Housing Gasket - For John Deere tractor models 1020, 1520, 2030, 2240 (s/n 350000-later), Compatible with John Deere Construction and industrial models 300 (Without Reverser), 300B (Without Reverser), 301, 301A, 302, 302A, 380, 400, 401, 401B, 401C, 401D, 480, 480A, 480B, 480C, Replaces John Deere OEM number R99290, T21968, (Item #: 161809)$10.98
No Picture
Clutch Kit - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401C, 401D, Replaces John Deere OEM number AL120022, AL39936, Replaces manufacturer number 6202-2RS, 6203-2RS, AG 28, N1171, Clutch Diameter - 11", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Solid, Clutch Type - 6 regular Pads, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 6, Pressure Plate Hub Diameter - 1-1/2", Pressure Plate Splines - 23, Pressure Plate Type - Single Stage, Flywheel Step .795", (Item #: 135031)$540.00
Clutch Kit, 10 Inch - Our clutch kit for tractors with reverser transmission includes: A new 10 inch, 3 spring, pressure plate assembly; a new, 10 inch, 20 spline, 1 5/16 inch hub, organic woven, heavy duty clutch disc; new release and pilot bearings. Used on (310, 310A less Independent PTO), 310, 480, 480A, 480B, 480C, (The Following with Reverser: 1020, 1520, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640), (The following with Reverser and less Independent PTO: 300, 300B, 301, 302A, 380, 400, 401, 401B, 401C, 401D, 410). (Item #: 184281, Ref: TP-R60368K)$258.00
Clutch Kit, 11 Inch Double - The 11 Inch double clutch is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1550, 1630, 2020, 2030, 2120, 2130, 2240, 2440, 2630, 2640, John Deere Construction and Industrials 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, 401D. Includes AL120022 pressure plate (Flywheel Step - 2.200 Inch to 2.210 Inch) with PTO Disc (1.5 Inch 23 spline hub), 11 Inch rigid transmission disc (1 inch, 15 spline hub), Release Bearing, Pilot Bearing and Alignment Tool. Replaces 228002310, 328006110, 628-1411-10, 628141110, AL120017, AL120022, AL67525 (Item #: 135038, Ref: R27706N-RKIT)$840.00
Clutch Kit, Remanufactured - For John Deere tractor models 330, 1020, 1520, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 310, 310A, 310B, 380, 401, 401B, 401C, 401D, 410, 480A, 480B, 480C, Clutch Diameter - 10", Clutch Hub Diameter - 1-5/16", Clutch Splines - 20, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 10", Pressure Plate Levers - 3, Pressure Plate Springs - 3, Pressure Plate Type - Single Stage, Flywheel Step 1.480", (Item #: 202066)$350.20
Clutch Plate, Powershaft - 4.917" O.D., 3.903"ID. For tractor models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. (Item #: 127161, Ref: T28665)$44.00
Clutch Release Bearing and Hub - This Clutch Release Bearing and Hub is used on 820, 920, 1020, 1120, 2020, 2120, 830, 930, 1030, 1130, 1630, 1830, 2030, 2130, 3030, 3130, 2040, 2240, 2840 Replaces AL27231 (Item #: 121895, Ref: AL27231)$126.00
Clutch Release Bearing - Greaseable - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1030, 1040, 1130, 1530, 1630, 1830, 1840, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2840, 3030, 3130, Replaces John Deere OEM number AL30777, ID: 1.960", ID Range: 1.750" - 1.999", Greaseable, For Non-Greaseable Throwout Bearing use Item #: 121895, (Item #: 166082)$144.64
No Picture
Clutch Release Bearing - Greaseable - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1630, 1830, 2040 (s/n 350000-earlier), 2120, 2130, 2240 (s/n 350000-earlier), 2840, 3030, 3120, 3130, Replaces John Deere OEM number AL27231, I.D.: 1.960", I.D. Range: 1.750" - 1.999", For Release Bearing use Item #: 100013, (Item #: 177005)$135.95
Clutch Release Throwout Bearing Carrier, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3150, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL39541, For a new version of this item use Item #: 170550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449538)$39.00
No Picture
Clutch Release Throw Out Bearing Carrier, Used - For John Deere tractor models 820 (3 cylinder), 830 (3 cylinder), 840 (With mid-PTO), 920, 930, 940, 1020 (European), 1030, 1040, 1120 (s/n 315197-later), 1130, 1140 (With mid-PTO), 1350 (With mid-PTO), 1530, 1630, 1640, 1750, 1830, 1840, 1850, 2020 (European), 2030 (European), 2040 (s/n 349999-earlier), 2120, 2130, 2150, 2155, 2240 (s/n 349999-earlier), 2255 (s/n 494049-earlier), 2350 (s/n 490745-earlier), 2355, 2840, 3030, 3120, 3130, Replaces John Deere OEM number AL30777, For a new version of this item use Item #: 121895, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447182)$75.00
No Picture
Clutch Unit, Remanufactured - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2355, 2440, 2450, 2550, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 401, 401B, 401C, 401D, Includes pressure plate with PTO disc and engine clutch disc only, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 15, Clutch Center: Solid, Clutch Type: 6 Pad, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: Belleville, Pressure Plate Hub Diameter: 1-1/2", Pressure Plate Splines: 23, Pressure Plate Type: Dual Stage, Flywheel Step 2.200"-2.210", For PIlot Bearing use Item #: 100013, Additional Handling and Oversize Fees Apply To This Item, (Item #: 203726)$618.00
Planetary Disc, 4th - 54 internal splines, 7.005" O.D.. For tractor models (1020, 2020, 2030, 2355, 2555 all with reverser trans), (300B with reverser), (2240 with reverser trans and SN# 350000 and up), (2155, 2355N all with directional reverser trans.), (2520 with powershift 2 plate clutch, 3 plate clutch or with PTO), (4230 with powershift SN# up to 028120), (4430 with powershift SN# up to 244988). Replaces R31404, RE23000. (Item #: 114639, Ref: RE27995)$25.98
Belt, Water Pump / Alternator - This belt is used on John Deere 300B, 2420, 1020, 1520, 1530 with Motorola Alternator, 2020, 2030 diesel, 2040 below serial number 349999, 2130, 2240 below serial number 340999, 2440, 820 3 Cylinder above serial number 75345, 830 3 Cylinder. It measures 0.688 inches wide by 49.25 inches. REC (Raw Edge Cogged) Polyester Cord. Replaces R97758, T20334 (Item #: 115444, Ref: R97758)$12.80
Cooling Fan - 6 Blade, Used - For John Deere tractor models 1040, 1140, 1641, 1641F, 1830, 2020, 2030, 2040 (s/n 350000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2250, 2251, 2251N, 2351, 2440, 2651, 2951, Compatible with John Deere Combine(s) 1174, Compatible with John Deere Construction and industrial models 401, 440 (s/n 49999-earlier), 440A (s/n 49999-earlier), 440B (s/n 49999-earlier), 480, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AT26373, 16 1/2" Diameter, 1-1/2" Pilot hole, Mounting holes on 1 3/4" centers, For a new version of this item use Item #: 155554, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 415443)$44.01
Cover - Thermostat, R97876, R70736 - For John Deere tractor models 840 (s/n 599999-earlier), 940, 1040, 1140, 1350 (European s/n 751253-earlier), 1550 (European s/n 751243-earlier), 1640, 1750 (European s/n 751243-earlier), 1840, 1850 (European s/n 751243-earlier), 2040, 2140, 2150, 2155, 2240 (s/n 350000-later), 2250 (European s/n 792266-later), 2255, 2350, 2355, 2450 (European s/n 792266-later), 2550, 2555, 2650 (European s/n 792266-later), 2750, 2755, 2850 (European s/n 792266-later), 2855, 5200, 5300, 5400, 5500, Compatible with John Deere Hay Cutting (s) 3830, Replaces John Deere OEM number R97876, R70736, O-Ring not included, For O-Ring use Item #: 161812, (Item #: 126941)$8.00
Fan, 4 Blade - Fan is 16.00" diameter with 1-1/2" pilot hole, mounting holes on 1-3/4" centers. For tractor models 1020, 1520, 2040, 2240, 820, 830, JD300, JD350, JD350B. (Item #: 108498, Ref: AT23180)$53.00
Fan, 6 Blade - 16-1/2" diameter, 1-1/2" pilot hole, mounting holes on 1-3/4" centers. For tractor models 2020, 2040, 2150, 2155, 2240, 2255, 2440, JD400, JD401, (JD440, JD440A, JD440B all SN# up to 49999), JD480. (Item #: 155554, Ref: AT26373)$75.00
Radiator - Core (the fin part) measures 13.6 in wide x 17.2 High. For 1020 (with hi-lo shift or reverser), 1030, 1120 (serial # 75430 and up), 1530, 2040 and 2240 (serial # up to 349999), 820, 830, 920 (serial # 75430 and up), 930. This radiator uses cap part number AT29054 and is not included. (Item #: 101746, Ref: AT20849)$245.00
Radiator - For tractor models 940, 1040, 1140, 2040 and 2240 (serial # 350001 up), 2150, 2255, 2155 (serial # up to 621999) (Item #: 101747, Ref: AL39290)$308.00
Radiator Hose - Bypass - For John Deere tractor models 2040 (s/n 350000-later), 2150, 2155, 2240 (s/n 350000-later), 2255, 2350, 2550, 2555, 2750, 2755, 2855, Replaces John Deere OEM number R70737, (Item #: 159696)$10.10
Thermostat - 180 degree. For tractor models (1040, 1140, 1350, 1550, 1750, 1850, 1850N all with 3179D engine), 1830, 2030, (2040, 2040S, 2130, 2250 all with 4239D engine), (2140 with 4239T engine), 2150, 2155, (2240 SN# 350000 and up), 2255. (Item #: 113746, Ref: AR61538)$10.60
Thermostat Housing Bypass Hose - Measuring 0.50 inches inside diameter on both end, this Bypass Hose is used in many John Deere models. Verify size or OEM number T20277 before ordering. (Item #: 125600, Ref: T20277)$8.50
Transmission Oil Cooler - This Transmission Oil Cooler is used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400 where an Oil Cooler is used. It replaces original part numbers AR69398, AT165535, AT169229, AT77459 (Item #: 121811, Ref: AT20848)$340.00
Water Pump - Water pump with 1 groove pulley. For diesel tractors: 2350, 2550, 2750 (prior to serial number 594282). Replaces John Deere casting number R70437. For 2350, 2550, 2750 Replaces AR65262, AR92147, AR92416, AR92417, AR92418, AR92903, RE19717, RE25043, RE26937, RE26955, RE40151, RE46238, RE46257, RE60489, RE92414. (Item #: 107989, Ref: AR92418)$148.00
Water Pump - Water pump with 1 groove, cast 5-inch diameter pulley. For diesel models: 820, 830, 1020, 1030, 1520, 2020, 2030, 2040, 2240 (prior to SN# 349999), 2440. Replaces John Deere casting numbers R51039, R55758. (Item #: 150365, Ref: TP-AT27018)$156.00
Water Pump - Water pump with 1 groove, cast 6-inch diameter pulley. For diesel engines. Tractors: 2040 (SN# 350000 and up), 2240 (SN# 350000 and up), 2150 (to SN# 704045), 2255 (to SN# 704045). Replaces John Deere casting number R70437. (Item #: 101898, Ref: AR92417)$152.00
Water Pump - For tractor models 2280, 2420, 290D, 300, 300B, 301, 301A, 302, 302A, 310, 400, 401, 440, 440A, 440B, 480, 70, 70D, (1020, 1520, 1530, 2030, 2440, 830, 930 all with Diesel Engines), 2020 DSC, (2040, 2240, both with Diesel seial number under 349999). Water Pump with gasket. Replaces casting numbers: R51039, R55758, AR67452, AR55094. Note: Can use T23628 Pulley. Will need to remove the hub first. Can be used in place of AR85250, AR87420, AR97708, AR97708 and RE19944 in some applications. Replaces: AR52423, AR55094, AR62548, AR65260, AR87420, AT29619, DE13243. (Item #: 101902, Ref: RE19944)$100.00
No Picture
Water Pump Hub - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2130, 2155, 2240, 2355N, 2440, 2510, 2520, 2640, 5200, 5500, 5500N, Compatible with John Deere Construction and industrial models 300, 301, 301A, 302, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number R30720, R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, R97081, Hub is only for following water pumps: R122337, R23631, R23632, R29521, R48992, R48997, R51039, R55164, R59049, R65880, R67188, and R97081, (Item #: 177034)$26.22
Water Pump, Remanufactured, AR92416, R78286 - For John Deere tractor models 840, 940, 1040, 1640, 1840, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2850, 2855, 5500, Replaces John Deere OEM number AR92416, AR92417, Replaces John Deere Casting number R78286, R100812, R70434, R70437, Includes pump to backplate gasket, Includes backplate to block gasket, Without backplate, hub or pulley, For replacement plate to block gasket use Item #: 155352, (Item #: 205934)$152.01
Water Pump Repair Kit - The Water Pump Repair Kit is used to repair a RE19944 water pump. The RE19944 water pump is used on many John Deere pieces of equipment. Replaces RE37483, RE11345, RE62658 (Item #: 128473, Ref: RE11345)$41.00
Decals and Emblems
2240 Hood Decal - For John Deere tractor model 2240 (Early Model), Replaces John Deere OEM number JD2240E, (Item #: 164867)$102.00
No Picture
Decal Set - Hood only set for Model 2240 up to Serial # 349999. (Item #: R3761)$53.99
No Picture
Decal Set - Hood only set for Model 2240 with serial # 350000 and up. (Item #: R3762)$49.96
Front Grille Emblem - For John Deere tractor models 830, 930, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240 (s/n 349999-earlier), 2440 (s/n 349999-earlier), 2630, 2640 (s/n 340999-earlier), 2840, 3030, 3130, Replaces John Deere OEM number R59991, R55213, R67027, Measures approximately 6" x 5", Two threaded shafts on back for mounting, nuts not included., (Item #: 103951)$22.30
Tractor Decal Set, Hood, John Deere 2240, Yellow - For John Deere tractor model 2240, Replaces John Deere OEM number JD416, Hood Decal Set, (Item #: 164903)$88.00
Drive Train
Axle Bearing - Part 6 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 112468, Ref: S.07772)$45.00
Axle Carrier Housing Pin - Part 1 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124686, Ref: S.07837)$33.00
Axle, Front - 38 teeth, Part 4 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124723, Ref: S.07838)$249.00
Axle Planetary Gear - Part 7 in picture. For tractor models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 114883, Ref: S.67164)$100.00
Oil Seal - Seal. For tractor models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T25809 hub, 2240, For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830 (Item #: 110547, Ref: TP-AT10344)$8.20
Shift Lever - For tractor models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, (820 SN# up to 024012) (Item #: 172674, Ref: AT20093)$61.00
Shift Lever - Used on John Deere models: 1020, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1130, 1520, 1530, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1830, 2020, 2030, 2030OU, 2035EF, 2120, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 820, 830, 920, 930, 930VU. This part replace John Deere part numbers R53817, T22809 (Item #: 152054, Ref: R53817)$31.00
Shift Lever Knob - This Red Shifter Knob is 1.600 inches outside diameter and has 3/8 inch - 24 UNF fine threads. Replaces John Deere part numbers R153875, R161382, R50864, R58296 (Item #: 114351)$8.50
Transmission Oil Pump - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2150, 2155 (s/n 731149-earlier), 2240 (s/n 350000-later), 2255, 2350, 2355, 2355 (s/n 731149-earlier), 2355N, 2550, 2555, Replaces John Deere OEM number AL41637, AL29878, For continuous running PTO, 540 RPM, Additional Handling and Oversize Fees Apply To This Item, (Item #: 155321)$328.00
Transmission Oil Pump Gears - Includes 2 gears only. For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1830, 2020, 2030, (2040, 2240 SN# up to 349999), 2120, 2130, 820, 830, 840, 940. (Item #: 152038, Ref: AR39164)$153.00
Electrical System
Accessory Relay - This accessory relay fits the following tractor models: 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, and 2630. It has 5 pins and is made to accommodate 12 volt systems. Replaces part number: AR74411. (Item #: 115683, Ref: AR74411)$12.50
Alternator - 12 volt, 35 amp. For tractor models 925, 930VU, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 940, (940 1980-84), 940V, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1040, (1130 1970-84), 1140F, 1140V, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1640, 1640F, (1830 1973-82), 1840, 1840F, (2020 1970-79), 2030, 2030OU, 2035, 2035EF, (2040 1976-82 with 164 dsl and 1979-85 with 152 dsl), 2040F, 2040S, (2120 1970-79), 2130, 2135, 2140, (2750 1983-86 with 239 dsl), (2840 1977-79 with 329 dsl), (2940 1980-84 with 359 dsl), (2950 1983-86 with 359 dsl), (3030 1979-82), 3130, 3135, 3140, (820 1968-72 with 3 cyl eng. and internal reg.), (830 1972-75 with 3 cyl), (920 1970-75), (930 1972-79), (1530 1974-75), (2150 1982-87 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl). Replaces 0120339512, 0120339545. (Item #: 113331, Ref: ABO0208)$119.00
Alternator - 12 volt, 55 amp. For tractor models (1030 1970-82 with 2.7L dsl), (1130 1970-82), 1350, 1550, (1630 1973-82), 1750, 1750V, 1850, 1850F, 1850V, 1950, 1950F, 2155, 2250, 2250F, 2355, 2450, 2450F, (2555 1987-92 with 239 dsl), 2650, 2650F, (2750 1983-86 with 239 dsl), (2755 1987-92 with 239 dsl), (2840 1977-79 with 329 dsl), 2850, (2855N 1987-93 with 239 dsl), (2950 1983-86 with 359 dsl), (2955 1987-92 with 359 dsl), (3040 1980-84), 3050, (3150 1985-87 with 359 dsl), 3350, 3640, (830 1972-75 with 3 cyl eng.), 840, (930 1972-79), (2150 1982-87 with 179 dsl), (2155 1987-92 with 179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 179 dsl), (2350 1983-86 with 239 dsl), (2355 1986-92 with 239 dsl), (2550 1982-87 with 239 dsl). Replaces 0120488218, 0120488267, 0120488217. (Item #: 113332, Ref: ABO0198)$127.00
Starter - 12 volt, 13 tooth, clockwise rotation. For tractor models 1133, (820 1968-72 with 3 cyl), (830 1972-75 with 3 cyl), 840, (920 1970-75), (1020 1965-73 with 152 dsl), (1520 1968-73 with 164 dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 202 dsl), (2030 1971-75 with 219 dsl), (2040 1972-85 with 152 dsl), (2150 1982-87 with 3-179 dsl), (2155 1987-92 with 3-179 dsl), (2240 1976-82 with 164 dsl), (2255 1983-87 with 3-179 dsl), (2350 1983-86 with 4-239 dsl), (2355 1986-92 with 4-239 dsl), (2550 1982-87 with 4-239 dsl), (880 1970-80 with 202 dsl), (270 1975-78 with 4-219 dsl), (2280 1975-85), (2320 1981-83 with 4-219 dsl), (2360 1984-93 dsl), (2420 1975-85 with 219 dsl). Replaces 1107863, 1362312, 1367075, 1107871, 1998367, 028000-8401. (Item #: 156209, Ref: SND0044)$135.00
Starter - This is a new Bosch design starter. 12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses AL55046 solenoid and AL25275 drive. Uses correct 13.5mm mounting hole diameter on DE. Fits multiple John Deere Tractors. Replaces; John Deere part numbers: AL110597, AR70436, AT23401, SE501411, SE501412, TY25290, TY25292, TY6720, TY6726, TY6780. (Item #: 109770, Ref: AR70436)$180.00
Starter - This is a 12 volt, Delco style starter OSGR with 10 teeth and clockwise rotation. Replaces 1107577, 1990435, SE501428, TS-1173, TS-1308, TS-1574, TS-6145, TY25994, 1107599, 1107863, 1107871, 260-67101, AL41247, AL62690, AL70850, AMRE239087, AR66424, AT18150, AT25619, DRS2420, DRS4730, DRS4740, RE19187, RE19275, RE50095. Used on for diesel application. (Item #: 113951, Ref: RE239087)$175.00
Starter Switch, Used - For John Deere tractor models 820, 830, 920, 930, 940, 955, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2955, 3020, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Harvester(s) 9900, Compatible with John Deere Construction and industrial models 300B, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR58126, For a new version of this item use Item #: 156037, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 456037)$9.01
Bushing - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, 2240, 2440, 2630, 2640, 2840, 3030, 3120, 3130, Compatible with John Deere Construction and industrial models 300, 301, 401, Replaces John Deere OEM number R39252, (Item #: 165633)$0.50
Clutch Control Valve Gasket - For John Deere tractor models 940, 1040, 1140, 1350, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1950, 1950N, 2040 (s/n 350000-later), 2140, 2141, 2150, 2155, 2240 (s/n 350000-later), 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440 (s/n 341000-later), 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2651, 2750, 2755, 2850, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040, 3050, 3055, 3140, 3141, 3150, 3155, 3255, 3340, 3350, 3351, 3640, 3641, 3650, 3651, Compatible with John Deere Construction and industrial models 301A (s/n 389637-later), 302 (s/n 389637-later), 401B (s/n 700790-later), 401D, Replaces John Deere OEM number L34345, All John Deere Construction and Industrial; With Independent PTO, (Item #: 161856)$4.90
Main Bearing - .010 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27353, AT21110 (Item #: 123853)$9.90
Main Bearing - .020 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27360, AT21112 (Item #: 123854)$8.80
Main Bearing - .030 - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over from 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE27368, AT21114 (Item #: 123857)$27.98
No Picture
Main Bearing Set, .010, 152, 162 179 Diesel - 152, 164 and 179 CID diesel engines. .010" main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255. (Item #: 106800, Ref: MBK1443-010)$66.00
No Picture
Main Bearing Set, .020, 152, 164, 179 Diesel - 152, 164 and 179 CID diesel. .020" main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255. (Item #: 106801, Ref: MBK1443-020)$38.98
No Picture
Main Bearing Set, .030, 152, 164, 179 Diesel - 152, 164 and 179 CID diesel engines. .030" main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255 (Item #: 106802, Ref: MBK1443-030)$46.00
No Picture
Main Bearing Set, STD, 152, 164, 179 Diesel - 152, 164 and 179 CID diesel engines. Standard main bearing set For 1020, 1520, 1530, 2040, 2150, 2240, 2255 (Item #: 106799, Ref: MBK1443)$70.00
Main Bearing - Standard - This is a single Main Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers T23214, R515304, RE27352, AT21140 (Item #: 123852)$10.50
Thrust Bearing - 010 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.010 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers (Item #: 123859, Ref: AT21132)$29.40
Thrust Bearing - .020 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.020 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers RE527235, AT21134 (Item #: 123860)$16.98
Thrust Bearing - 030 - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 0.030 over 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21136, RE527236 (Item #: 123861)$10.98
Thrust Bearing - Standard - This is a Thrust Bearing used in John Deere 3, 4 and 6 cylinder engines. 3.124 inch standard journal size. Used in 6 cylinder 6303, 6329, 6359, 6414 engines. Used in 4 cylinder: 4-202, 4-219, 4-239 up to engine SN: 299999, 4-276 up to engine SN: 299999. Used in 3 cylinder 3-135, 3-152, 3-164, 3-179. Replaces John Deere part numbers AT21139, T23215 (Item #: 123858)$28.60
Washer - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1350, 1530, 1550, 1630, 1750, 1850, 2040, 2240, Compatible with John Deere Construction and industrial models 300, 301, 302, Replaces John Deere OEM number T22098, Inside Diameter: .801", Outside Diameter: 1.001", Thickness: .190", Teflon, (Item #: 122135)$9.10
Engine Gaskets
No Picture
Cylinder Block Plate Gasket - For John Deere tractor models 820, 830, 920, 930, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3030, 3130, 3300, 4030, 4050, 6600, Compatible with John Deere Combine (s) 925, 935, 945, 955, 965, 965 (H), 968 (H), 975, 985, Replaces John Deere OEM number R90648, R131794, R73140, T24965, (Item #: 176678)$11.70
Front Crankshaft Seal - This front crankshaft seal has a 2.175 inch Inside Diameter, a 3 inch Outside Diameter and is 0.38 inches wide. It Fits: 2150, 2155, 2240, 2250, 2250F, 2255, 2345F, 2350, 2355, 2355N, 2440, 2450, 2450F, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650F, 2650N, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3155, 3200, 3200X, 3210, 3210X, 3255, 3300X. Replaces AR67942, AT21608 (Item #: 106849, Ref: AT21608)$7.00
No Picture
Full Gasket Set - With Rear Main Seal and Timing Cover Seal For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Item #: 131624, Ref: R-RE50978)$156.00
No Picture
Gasket Set - For tractor models 1520, 1530, 2040, 2150, 2240, 2255. (Item #: FS3506W)$107.03
No Picture
Head Gasket Set - For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Item #: 123875, Ref: R-RE38850)$45.00
No Picture
Oil Pan Gasket, Gas or Diesel - For tractor models 1020, 1520, 1530, 2040, 2150, 2240, 2255. (Item #: 106908, Ref: TP-R97341)$9.90
No Picture
Oil Seal - Seal. For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830 (Item #: 110547, Ref: TP-AR49592)$8.20
No Picture
Overhaul Gasket Set without Seals - For tractor models 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355NCS, 2355NTSS, 301A, 302, 302A, 310, 350B, 350C, 350D, 355D, 5000, 5200, 5300, 5400, 5400N, 5500. All with either 3.164D, 3.1779T, or 3.179D engines. (Item #: 106930, Ref: RE37492)$91.00
Rear Main Seal - For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Item #: 106854, Ref: R-RE24959)$27.00
No Picture
Upper Gasket Set - This upper gaskets set includes all engine rebuild gaskets needed from the head gasket and up. For Diesel tractor models 1520, 1530, 2040, 2150, 2240, 2255. (Item #: 123875, Ref: HS3506W)$45.00
Engine Rebuild Kits
No Picture
Basic In-Frame Overhaul Kit - BASIC In-Frame Overhaul KIT. 179 CID 3 cyl. diesel, 4.19" standard bore, 3 ring piston. For tractor models (2040, 2240 SN# 350000 and up), 2150, 2255. (Item #: 189560, Ref: BIFD4478)$432.00
No Picture
Basic Overhaul Kit - BASIC Overhaul Kit. 179 CID 3 cyl. diesel engine, 4.19" standard bore, 3 ring piston. For tractor models (2040, 2240 SN# 350000 and up), 2150, 2255 (Item #: 130656, Ref: BEKD4478-LCB)$572.00
Cylinder Kit - For John Deere tractor models 2040 (s/n 350000-later), 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2940, 2950, 2955, 3055, 3150, 3155, 5200, 5300, Replaces John Deere OEM number RE24458, RE30250, Includes; Sleeve, piston, rings, pin, Sold per cylinder, (Item #: 108584)$137.00
Engine Overhaul Kit with Crankshaft - For 3 cylinder 179 CID Diesel. Engine serial number 350000 and up. 1 3/8 inch Piston Pin. Plain Liner. NO Grooves. Kit contains sleeves and sleeve seals, pistons and rings, pins and retainers, pin bushings, complete gasket set, crankshaft seals, new crankshaft, rod bearing and main bearings. The late production of this engine has NO grooves on the sleeves for the o-rings. Note, this kit does not contain connecting rod bolts. It is recommended that they be changed when replacing the rod bearing. They can be ordered separately as part number R74194 for 2.125 long bolts and R80033 for 2.325 long. (Item #: 183973, Ref: EKMC56)$1739.01
No Picture
Finished Piston Liner - For John Deere tractor models 1445F, 1630, 1640 (s/n 430000-later), 1745F, 1845F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2240 (s/n 349999-earlier), 2255, 2350, 2355N, 2550, 2750, 2755, 2855N, 2950, 2955 (s/n 767516-earlier), 3030, 3040 (s/n 430000-later), 3130, 3140 (s/n 430000-later), 3155, 5600, 5700, 6300, 6500, 6600, Compatible with John Deere Combine (s) 925, 932, 935, 942, 945, 952, 955, 965, 968, 975, 985, 1032, 1042, 1052, 1055, 1065, 1068, 1072, 1075, 1085 (s/n 689245-later), 1133, 1144, 1155, 1165 (s/n 45000-earlier), 1165, 1166, 1174, 1174H4, 1175 (s/n 45025-earlier), 1175, 1175H4 (s/n 45025-earlier), 1175H4, 1177, 4425, 6300, 7300, 7500, Compatible with John Deere Harvester (s) 7445, 9930, Compatible with John Deere Construction and industrial models 350D, 355D, 4400, 4500, Compatible with John Deere Engine (s) 3029, 3179, 4239, 6059, 6068, 6359, Compatible with John Deere Hay Cutting (s) 2360, Replaces John Deere OEM number R80724, Inside Diameter: 106.50 mm, Bottom Diameter: 115.70 mm, Length: 197.05 mm, Top Diameter: 125.99, Top Lip Thickness: 6.05 mm, Lip to Top Thickness: .89 mm, (Item #: 168455)$33.00
Clutch Shaft, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040 (s/n 349999-earlier), 2240 (s/n 349999-earlier), 2440, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos T42381, 540 PTO, Collar Shift Tranny, 19 Tooth Gear, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498450)$590.01
Connecting Rod - This Connecting Rod is used in John Deere 3.164D, 3.179D and 4.219 Diesel Engines. Replaces those marked R51727, R80034 (casting numbers). Replaces original part numbers AR55978, R51727, RE16495, RE21076 (Item #: 108583, Ref: RE16495)$58.00
Connecting Rod Bolt - Used on Connecting Rods marked T20007, R51727, or R58979, this bolt is 2.125 inches long. (Item #: 109500, Ref: R74194)$2.70
Connecting Rod Bolt - Used only for connecting rods with casting number: R80032, R80034, R81410, R121092, or R113612. Check casting number before ordering. 2.325 inch long. (Item #: 123880, Ref: R80033)$3.00
Connecting Rod, Used - For John Deere tractor models 1020 (s/n 199743-later), 1030, 1120 (s/n 199743-later), 1130, 1530, 1630, 1830, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2520, 2550, 2840, 2940, 2950, 2955, 3030, 3055, 3130, 3150, 3155, 4030, Compatible with John Deere Combine(s) 925, 930, 932, 935, 940, 955, 1032 (s/n 603298-earlier), 1042 (s/n 603298-earlier), 1055 (s/n 603298-earlier), 3300, 4400, 6600, Compatible with John Deere Harvester(s) 484, 7440 (s/n 603298-earlier), 9900, 9910, 9920 (s/n 603298-earlier), Compatible with John Deere Construction and industrial models 415B (s/n 603298-earlier), 515B (s/n 603298-earlier), Compatible with John Deere Engine(s) 3179 (s/n 603298-earlier), 4219 (s/n 603298-earlier), 4239D (s/n 603298-earlier), 6359D (s/n 603298-earlier), Replaces John Deere OEM nos AR55978, RE21076, RE16495, Replaces John Deere Casting nos R51727, Connecting Rod weight: 1906 Grams, Caps are different between casting numbers, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408583)$25.01
Connecting Rod, Used - For John Deere tractor models 1030, 1130, 1530, 1630, 1640, 1830, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2520, 2550, 2555, 2840, 2940, 2950, 2955, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 4030 (s/n 277550-later), Compatible with John Deere Combine(s) 4400, 4435, 6600, Compatible with John Deere Harvester(s) 7440, 9920, Compatible with John Deere Construction and industrial models 210C, 300D, 310D, 315D, 415B, Compatible with John Deere Hay Cutting(s) 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM number AR55978, RE16495, RE21076, SE500747, Replaces Casting nos R51727, R80034, Connecting Rod weight: 1930 Grams, Caps are different between casting numbers, For a new version of this item use Item #: 108583, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498750)$25.01
Countershaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos L41021, Teeth: 26/29/33/36, Width of the 36 tooth gear is 1.14", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431336)$195.01
Crankshaft - This crankshaft should be verified by the Casting # T23516 off your old crankshaft AND Snout Length of 1.37 inches. This casting number had 2 different snout lengths and is NOT interchangeable. It does not come with gear or bearings. For tractor models 1020, 1030, 1040, 1140, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2330, 2355, 300, 300A, 300B, 301A, 302, 302A, 310, 350A, 350B, 350C, 350D, 355D, 380, 5200, 5300, 5400, 5400N, 5500, 820, 830. Please Verify Length Of Snout Before Ordering, standard short snout (1.370"). (Item #: 102102, Ref: AT18031)$562.00
Crankshaft Pulley - This crankshaft pulley measures 5.59 inches outside diameter, has a 1.495 bore diameter, is a 1 groove pulley at .597 inch width. Replaces R49312, R47412, T25365 and T24440 or models (2040, 2240 both after SN# 350000), 2150, 2155, 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2855. (Item #: 157741, Ref: R80808)$98.00
Crankshaft Pulley - For JD103, 1020, 820, 830, 2240. Crankshaft Pulley replaces T24441, T25366. 1.5" I.D., 2.750" Center to Center on Holes. (Item #: 158238, Ref: R59915)$106.00
No Picture
Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For tractor models 1020, 1520, 1530, 2040, 2150, 2240, 2255. Valve overhaul kit. Contains intake and exhaust valves, valve caps, spring, and keys. 1 kit used in 152 CID, 164 CID, and 179 CID 3 cylinder diesel engines (Item #: VOKD152)$132.19
No Picture
Cylinder Head, Remanufactured, R58685 - For John Deere tractor models 830, 1030, 1130, 1530, 1630, 2040, 2150, 2155, 2240, 2255, 2355N (Diesel), Compatible with John Deere Engine (s) 179, 3179, Replaces John Deere Casting number R58685, Engine 179, Cylinders: 3, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200316)$990.01
No Picture
Cylinder Head, Remanufactured, R58686 - For John Deere tractor models 820, 830, 930, 940, 1030, 1040, 1140, 1530, 1550, 1750, 1850, 2040, 2155, 2240 (Diesel), Compatible with John Deere Construction and industrial models 300, Compatible with John Deere Hay Cutting (s) 930, Replaces John Deere Casting number R58686, Cylinders: 3, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200303)$950.01
Cylinder Head, Used - For John Deere tractor models 830, 1030, 1130, 1530, 1630, 2040, 2150, 2155, 2240, 2255, 2355N (Diesel), Compatible with John Deere Engine(s) 179, 3179, Replaces John Deere Casting number R58685, Cylinders: 3, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200316, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400316)$540.01
No Picture
Cylinder Head with Valves, Remanufactured, R58686 - For John Deere tractor models 830, 940, 1030, 1040, 1130, 1140, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2250, 2255 (Diesel), Compatible with John Deere Combine (s) 2240, Compatible with John Deere Construction and industrial models 300, Replaces John Deere Casting number R58686, R58685, Engine 179, Cylinders 3, Casting No. R58686, R58685, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 205537)$1500.01
Disc Hi-Lo Clutch - For John Deere tractor models 2155, 2240 (s/n 350000-later), 2355, 2440 (s/n 341000-later), 2555, 2640 (s/n 341000-later), 2755, 2855, 2940, 2950, 3055, 3155 (With hi-lo Clutch), 3255 (All With hi-lo Transmission), Replaces John Deere OEM number AL38238, AL30687, I.D.: 6.608", O.D.: 7.560", (Item #: 119990)$31.00
Drive Shaft Assembly, Used - For John Deere tractor models 940, 1040, 1140, 1640, 1840, 2040, 2140, 2150, 2240 (s/n 430000-later), 2350, 2550, 2750, 2940, 2950, 3040, 3140, 3150, Replaces John Deere OEM nos AL39233, AL28707, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499775)$1775.01
Drive Shaft Gear, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos AL28709, Teeth: 24 and 39, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431002)$194.01
Extensions Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 379721-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 379721-later), 2350, 2550, 2750, 2940 (s/n 379721-later), 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3641, Replaces John Deere OEM nos L37590, Splines: 28, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431332)$310.01
Flywheel Housing, Used - For John Deere tractor models 820 (Utillity), 830 (Utillity), 1020, 1520, 1530, 2020, 2030, 2040 (Utillity s/n 349999-Earlier), 2240 (s/n 349999-Earlier), 2440 (s/n 340999-Earlier), 2630, 2640 (s/n 340999-Earlier), 2840, Replaces John Deere OEM nos R63434, T25117, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496790)$375.01
Flywheel With Ring Gear - For John Deere tractor models 830, 840 (s/n 350000-later), 930, 940 (s/n 350000-later), 1030, 1040 (s/n 350000-later), 1130 (s/n 350000-later), 1130, 1140 (s/n 350000-later), 1350 (s/n 350000-later), 1550 (s/n 350000-later), 1630, 1750 (s/n 350000-later), 1850 (s/n 350000-later), 1950 (s/n 350000-later), 2040 (s/n 350000-later), 2150 (with dual stage clutch), 2155 (with continuous running pto), 2240 (s/n 350000-later), 2255 (with dual stage clutch), Compatible with John Deere Combine (s) 2240, Replaces John Deere OEM number AR92506, Replaces John Deere Casting number R70488, R80867, Teeth: 142, (Item #: 121431)$718.00
Front Engine Plate, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2040 (s/n 465252-earlier), 2240 (s/n 465252-earlier), 2440, 2510, 2630, 2640, 2840 (ESN ending with T), 4030, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, Compatible with John Deere Harvester(s) 484, 7440 (s/n 599234-earlier), 9900, 9910, 9920, 9920 (s/n 599234-earlier), Compatible with John Deere Construction and industrial models 300B (s/n 127775-earlier), 301A (s/n 127775-earlier), 350C (s/n 127775-earlier), 510B (s/n 129443-earlier), Compatible with John Deere Engine(s) 4276 (s/n 129222-earlier), Compatible with John Deere Hay Cutting(s) 2280, 2320, 2420, Replaces John Deere OEM nos R56736, Diesel Engines, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434397)$100.01
No Picture
Front Plate, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2640 (s/n 341000-later), 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3055, 3150, 3155, 3255, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6500, 6500L, 7200, 7400, 7600, 7700, 7800, Compatible with John Deere Combine(s) 3300, 4425, 4435, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 310D, 315D, Compatible with John Deere Engine(s) 4039, 4045, 4239D, 4239T, 4276, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2360, 3430, 3830, Compatible with John Deere Sprayer(s) 6100, 6500, 6600, Replaces John Deere OEM nos RE16149, R79863, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442437)$145.01
Gear - 4Th and 8Th, Used - For John Deere tractor models 820, 830, 1520, 1530, 2020, 2030, 2040, 2155 (s/n 756483-earlier), 2240, 2355 (s/n 756483-earlier), 2440, Replaces John Deere OEM number T21977, Teeth: 27 and 20, For a new version of this item use Item #: 172301, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438058)$71.01
Gear - Reverse Range, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2255, 2350, 2541, 2550, 2750, 2940, 2941, 2950, 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3150, Replaces John Deere OEM nos L33025, Teeth: 26 and 28, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431248)$100.01
Helical Camshaft Gear, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1040, 1120, 1140, 1350, 1420, 1520, 1530, 1630, 1640 (s/n 430000-later), 1750, 1850, 2020, 2030, 2040, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240, 2250, 2255, 2320, 2350, 2355, 2355N, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2630, 2640, 2650, 2730, 2735, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3050, 3055, 3100, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3330, 3350, 3530, 3540, 4020, 4030, 4050, 4530, 5105, 5200, 5205, 5210, 5220, 5300, 5310N, 5400, 5400N, 5500, 5700, 6200, 6200L, 6210, 6300, 6300L, 6310, 6400, 6400L, 6410, 6500, 6500L, 6510, 7200, 7210, 7400, 7410, 7600, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 6600, 6602, 9400, Compatible with John Deere Skid Steer Loader(s) 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 499, 699, 7440, 7445, 7450, 7455, 9900, 9910, 9920, 9930, Compatible with John Deere Construction and industrial models 70D, 210C, 244E, 290D, 300A, 300B, 300D, 301A, 302A, 310C, 310D, 315C, 315D, 340D, 344E, 350A, 350B, 350C, 350D, 355D, 380, 400, 401, 401A, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 440A, 440B, 440C, 444D, 448D, 450, 450A, 450B, 450C, 450D, 455D, 480, 480A, 480B, 480C, 490, 510B, 515B, 540B, 540D, 544, 544B, 544E, 544G, 548D, 555A, 555B, 555G, 570, 570A, 570B, 590D, 595D, 610B, 610C, 640D, 648D, 650G, 670, 670A, 672A, 710B, 710C, 3420, Compatible with John Deere Engine(s) 135, 152, 180, 202, 219, 3029, 4039, 4045, 4239D, 4239T, 6059T, 6068D, 6068T, 6329D, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 2270, 2280, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20070, Teeth: 48, For a new version of this item use Item #: 121425, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421425)$25.01
No Picture
High Low Clutch Assembly, Used - For John Deere tractor models 1020, 1530, 2030, 2240 (s/n 349999-earlier), 2440 (s/n 340999-earlier), 2630, 2640 (s/n 340999-earlier), Replaces John Deere OEM number RE228006, AR82017, AR82021, AR86461, For a Remanufactured version of this part use Item #: 207224, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497579)$2925.01
Hi-Lo Clutch Plate - For John Deere tractor models 2155, 2240 (s/n 350000-later), 2355, 2440 (s/n 341000-later), 2555, 2640 (s/n 341000-later), 2755, 2855, 2940, 2955, 3055, 3155, 3255 (All With Hi-Lo Transmission), Replaces John Deere OEM number L33163, I.D.: 6.625", O.D.: 7.550", (Item #: 127058)$5.98
No Picture
Pinion Shaft Gear, Used - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550 (s/n 756483-earlier), 1630, 1640, 1641F, 1750 (s/n 756483-earlier), 1830, 1840, 1850 (s/n 756483-earlier), 2020, 2030, 2040, 2120, 2150, 2155 (s/n 756483-earlier), 2240, 2250 (s/n 756483-earlier), 2255, 2350, 2355 (s/n 756483-earlier), 2440, 2450 (s/n 756483-earlier), 2550, 2555 (s/n 756483-earlier), Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 310, 380, 400, 401, 401C, 410, 480, 480C, Replaces John Deere OEM number T21976, 2nd and 6th Speed, Teeth: 20, Teeth: 36, For a new version of this item use Item #: 172309, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437964)$95.01
No Picture
Planet Pinion Gear Sleeve, Used - For John Deere tractor models 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2255, 2350, 2355, 2355N, 2440 (s/n 341000-later), 2550, 2555, 2755, 2855N, 2940, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3351, 3651, Replaces John Deere OEM nos L33157, Teeth: 18 and 21, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449385)$140.01
Reverse Gear, Used - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155 (s/n 756483 -earlier), 2240, 2250, 2255, 2350, 2355 (s/n 756483 -earlier), 2440, 2450, 2550, 2555 (s/n 756483 -earlier), 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, Replaces John Deere OEM number T21981, Teeth: 21, For a new version of this item use Item #: 173323, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447898)$104.01
Shift Collar Carrier, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516--earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, 6105M, 6105R, 6110R, 6115M, 6115R, 6120R, 6125M, 6125R, 6130R, 6140M, 6230 Premium, 6330 Premium, 6430 Premium, 7130 Premium, 7200, 7230 Premium, 7400, 7600, 7610 (s/n 089999-earlier), 7700, 7710 (s/n 089999-earlier), 7800, 7810 (s/n 089999-earlier), Compatible with John Deere Engine(s) 4045 (HL500/503), Replaces John Deere OEM number L33060, Teeth: 26, For a new version of this item use Item #: 161882, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431254)$42.01
Shift Collar - Pinion Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM nos L33033, Teeth: 26, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431249)$32.01
Shift Collar, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, Replaces John Deere OEM nos L33024, L100528, Teeth: 26, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431247)$48.01
Timing Gear Cover, Used - For John Deere tractor models 830, 930, 1130, 1630, 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2240 (s/n 350000-later), 2255, 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4050, 4250, 4450, 9400, Compatible with John Deere Combine(s) 1032 (s/n 742464-earlier), 1042 (s/n 742464-earlier), 1052 (s/n 742464-earlier), 1055, 1065, 1072, 1075, 1085 (s/n 041201-later), 4425, 4435, Compatible with John Deere Harvester(s) 7445, 7450, 9930, Compatible with John Deere Engine(s) 3029, 3179, 4039, 4045, 4239, 4239D, 4239T, 4276, 6059 (s/n 699999-earlier), 6068 (s/n 699999-earlier), 6329D, 6359, 6359D, 6359T, 6414D, 6414T, Compatible with John Deere Hay Cutting(s) 3430, 3830, Compatible with John Deere Sprayer(s) 6500, 6600, Replaces John Deere OEM nos RE30685, RE30684, AR91662, AR97707, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439517)$100.01
Timing Gear Cover, Used - For John Deere tractor models 830, 930, 1020, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3030, 3130, 4030, Compatible with John Deere Combine(s) 932, 942, 952, 955, 965, 975, 985, 3300, Compatible with John Deere Harvester(s) 484, 5420, 5440, 7440, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 70, 210, 210C, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 315, 315C, 340, 340D, 350, 350B, 350C, 380, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 440, 440A, 440B, 440C, 440D, 444, 444C, 444CH, 444D, 450, 450B, 450C, 450D, 455, 455D, 480, 480A, 480B, 480C, 482, 482C, 490, 510, 510B, 510C, 540, 540A, 540B, 540D, 544, 544A, 544B, 544D, 548, 548D, 550, 550A, 555, 555A, 555G, 570, 570A, 610, 610B, 610C, 640, 640D, 643, 648, 648D, 650, 650G, 655, 655B, 670, 670A, 670B, 672, 672B, 690, 690D, 690DR, 693, 693D, 710, 710B, 710C, 750, 750B, 755, 755A, 755B, Compatible with John Deere Hay Cutting(s) 2320, 2360, 2420, Replaces John Deere OEM number AR58196, AR58195, Replaces Casting nos R52880, T20153, AT27105, Oblong Inspection Hole Casted Shut, For a new version of this item use Item #: 123600, (Item #: 423600)$66.01
No Picture
Torsional Dampener - For John Deere tractor models 830, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 1750 (V), 1830, 1840, 1850, 1850 (V), 1950, 2020, 2030, 2040, 2120, 2240, Replaces John Deere OEM number AL32964, AL19085, With Independent PTO, (Item #: 187046)$221.00
Transmission Countershaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120 (1030), 1130, 1520, 1530, 1630, 1640 (s/n 430000-Later), 1830, 2030, 2040 (s/n 430000-Later), 2120, 2150, 2240, 2255, 2350, 2355 (s/n 756483-Earlier), 2550, 2555 (s/n 756483-Earlier), Replaces John Deere OEM number T24726, Teeth: 37, For a new version of this item use Item #: 164810, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496773)$194.01
Transmission Drive Shaft, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos T21980, Teeth: 14, 18, 23, 28 and 12, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430538)$175.01
No Picture
Valve, Exhaust - Valve, exhaust, standard. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277549 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030 (Item #: 128630, Ref: TP-R79624)$8.20
Valve, Intake - Used on John Deere 152, 164, 179 - 3 cylinder, 202, 219, 239, 276 4 cylinder, and 329. 359 6 cylinder diesel engines. 1.772 inch Head O.D., 0.371 inch Shaft O.D., 5.168 inch Overall Length. Replaces John Deere R79623, R52251 (Item #: 128629, Ref: R79623)$8.20
Valve Lifter, Used - For John Deere tractor models SE6100, SE6200, SE6300, SE6400, 301, 820, 830, 840 (s/n 599999-earlier), 920, 930, 940, 1020, 1030, 1035 (s/n 50000-later), 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1635, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 2130, 2135 (s/n 50000-later), 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955 (s/n 767516-earlier), 3030, 3040, 3050, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3200, 3210, 3255, 3300, 3310, 3340, 3350, 3400, 3410, 3640, 3650, 4030, 4040, 4240, 5103, 5105, 5200, 5203, 5205, 5210, 5215F, 5215V, 5220, 5300, 5303, 5310, 5315, 5315V, 5320, 5400, 5403, 5410, 5415, 5500, 5510, 5515, 5515V, 5600, 5700, 6200, 6300, 6400, 6500, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 7700, 7800, Compatible with John Deere Combine(s) 925, 945, 952, 975, 985, 1032, 1042, 1052, 1065 (s/n 41200-later), 1068, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1166, 1169, 1174, 1177, 2054 (European), 2056 (European), 2058 (European), 3300, 4400, 4420, 4435, Compatible with John Deere Skid Steer Loader(s) 24, 240, 250, 260, 270, 8875, Compatible with John Deere Harvester(s) 484, 5440, 7440, 7445, 7450, 9900, 9910, 9920, Compatible with John Deere Construction and industrial models 301A, 344E, 344G, 401B, 444, 444C, 444D, 444E, 444G, 544, 544G, Compatible with John Deere Hay Cutting(s) 2250, 2270, 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, 6100, 6500, 6600, Replaces John Deere OEM number T20073, For a new version of this item use Item #: 123888, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442423)$4.51
Valve Service Kit - Cylinder head Service kit. For tractor models 1020, 1520, 1530, 2040, 2150, 2240, 2255. Contains: springs, guides, locks, (no valves). (Item #: VSKD152)$57.17
Valve Stem Cap - This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Item #: 121443, Ref: T20129)$3.90
Engine Pistons and Sleeves
No Picture
Piston Kit - For Std. Compression Engines With Pistons Marked B For 2040, 2150, 2240, 2255 (Item #: PKD478)$430.09
No Picture
Piston Pin Bushing - Bushing, for 1-3/8 outside diameter piston pin. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277550 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1530, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2840, 2940, 2950, 2955, 4030 (Item #: 166194, Ref: TP-R55647)$5.30
No Picture
Sleeve Assembly (3 Required) - 4.190 Bore For 2040, 2150, 2155, 2240, 2255, 2355N with 179 or 3029 Diesel Engine (Item #: R-RE30250)$127.86
Engine Rings
Piston Rings - Ring set for 3 ring piston~ 1 used per piston. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. Compression Rings 1 at .125 inches, 1 at .094 inches. Oil Rins 1 at .140 inch. Used on John Deere 3, 4 and 6 cylinder engines: 3029, 3029T, 3179, 4039, 4045, 4045T, 4239A, 4239D, 4239T, 4276, 6059, 6059T, 6068D, 6068H, 6068T, 6359A, 6359T, 6414D, 6414T Replaces RE15674, RE48818, RE516267, RE66820, RE507852 (Item #: 120925, Ref: PRSD461)$23.40
No Picture
Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. 179 CID 3 cyl. diesel non-turbo engine serial number 350000 and up~4.19 standard bore. For standard compression engines with pistons marked B, 3 ring piston. Used on tractors 2040, 2240. For 2040, 2240 (Item #: PRSD478)$102.26
Exhaust System
Exhauste Manifold - For 1020, 1520, 1530, 2040, 2240, 820, 830, all with 3 cylinder diesel engines. Does not come with manifold gaskets. Order part number 126923 x3 for gaskets. (Item #: 101584, Ref: T20252)$110.00
Manifold Gasket, Single - This gasket is used with T20252 Manifold. For tractor models 1020, 1520, 1530, 2040, 2240, 820, 830, 920, 930 and 940. Order 3. (Item #: 126923, Ref: R0912G)$1.50
Muffler - Horizontal muffler with Heat Shield. Muffler measures 31 inches, 35 1/2 overall, has an inlet of 2 inches and an outlet of 1 3/4 inches. Body diameter is 4 5/8 inches. For models 300, 301, 301A, 302, 400, 401, 401B, 1020, 1120, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2140, 2240. (Item #: 163094, Ref: AT21795)$260.00
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794)$8.90
Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Item #: 121925, Ref: T23262)$6.00
Air Cleaner Hose, Suction - A= 2.75", B=2.00". For tractor models 1020, 1030, 1120, 1130, 1530, 1630, (1830, 2030 SN# 115792 TO 292145), (2040 SN# UP TO 349999), (2130 SN# 115792 TO 292145), (2240 SN# UP TO 349999), 820, 920, 830, 930. (Item #: 172346, Ref: L29373)$23.60
Air Cleaner Pipe Grommet - This air cleaner pipe grommet has an inside diameter of 2.60 inches, outside diameter of 6.82 inches and is 2.37 inches tall. For tractor models (820, 830 3 cylinder), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 6150, (4000, 4020 diesel), 4030, 4040, (4050 up to SN# 5510), 4230, 4240. Replaces AR56275, R28799, R50082, R57119. (Item #: 125562, Ref: AR56061)$15.00
Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517)$32.00
Fuel Pump - This fuel pump is for diesel tractors: 830, 930, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159, DD14195, RE37482, AR102678, DD13483, RE37482, AR52729. Ports are 3/8 - 20 thread. The inlet is at 1 o'clock and outlet at 7 o'clock with the cam lever pointing toward you. The inlet and outlet can be "clocked" to a different position. Some applications may need different fittings, but thise are not supplied by Yesterday's Tractor. (Item #: 112524, Ref: TP-RE42211B)$24.40
Fuel Return Tee - This Tee sits on top of the injector and connects to the diesel return line. (Item #: 176360, Ref: AT27622)$13.10
No Picture
Fuel Shutoff Cable - 66" total length. For tractor models (1030, 1130, 1630 without cab), 1530, 2030, 2040, 2240, (2440, 2640 SN# 341000 and up), 2840, 2940, 830. All with diesel engines. Replaces AL24155, RE10596. (Item #: 161932, Ref: RE169790)$33.00
Fuel Shut-Off Valve - This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Item #: 122256, Ref: R34656)$14.00
Fuel Tank - Fiberglass Fuel Tank is for tractor models: (1020, 1030, 1120, 1130, 1630, 820, 830, 920, 930) (2040, 2240 All SN<349999). Fuel Tank for European models and US 1530. (Item #: 103944, Ref: AR72910)$450.00
Fuel Tank - Metal - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 2040 (s/n 349999-earlier), 2240 (s/n 349999-earlier), Compatible with John Deere Combine (s) 2240 (s/n 349999-earlier), Replaces John Deere OEM number AL24219, AR72910, AT31633, For fiberglass tank use Item #: 103944, Additional Handling and Oversize Fees Apply To This Item, (Item #: 146705)$530.00
Locking Fuel Tank Cap - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2140, 2150, 2155, 2240 (s/n 350000-later), 2250, 2255, 2350, 2355, 2550, 2555, 2650, 2750, 2755, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650, Replaces John Deere OEM number AL34678, For tractors with plastic fuel tanks, Fuel Cap - Red use Item #: 113550, (Item #: 121517)$16.00
Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R)$28.30
Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626)$18.00
Sending Unit, Fuel - Sending Unit, fuel (spade type terminals). For tractor models 1020, 1030, 1120, 1130, 1530, 1630, 1830 (serial number <294961), 2030 (serial number <294961), 2130 (serial number <294961), 2140, 2240 (serial number <349999), 2840, 3030, 3130, 820 (3 cylinder), 830 (3 cylinder), 920, 930. Replaces AT31619. (Item #: 114952, Ref: AT31619)$45.00
Gauges
Fuel Gauge - This Fuel Gauge is used multiple John Deere tractors and combines. It is a 12 volt illuminated gauge with a 2.047 inch body outside diameter. The length of the gauge is 1.87 inches. It replaces original John Deere part numbers AL24187, AL18155, AL24294 (Item #: 101919, Ref: AL24294)$24.20
Complete Non-Adjustable Lift Link Assembly - Left Hand - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number R48595, T25836, Fit left hand side, Rod Length: 21-3/4", Min / Max Length: 24" / 31", For assembly with 17.5" rod use Item #: 111346, (Item #: 130489)$91.00
Draft Link Bushing - This Draft Link Bushing is used on John Deere 1020, 1030, 1040, 1120, 1130, 1140, 1530, 1630, 2040, 2150, 2155 (serial number below 651779), 2240, 2255, 830 (3 Cyl.), 840, 930, 940 (Item #: 152041, Ref: L26933)$9.50
Draft Link Pull Arm, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2010, 2020, 2030, 2120, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT30151, Length: 31", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498803)$286.01
Drawbar - Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, and 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855. Replaces R61126 (Item #: 110255, Ref: R3092)$127.00
Drawbar Fastener Pin, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT19850, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497259)$31.01
Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Item #: 155460, Ref: AL27203)$64.00
Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Item #: 155461, Ref: L32016)$7.67
Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Item #: 155462, Ref: L31849)$7.50
Drawbar Hammerstrap Pin - T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Item #: 128172, Ref: AR69988)$23.80
Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, and 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. Drawbar pin available as part# L32016. (Item #: 108511, Ref: L29020)$136.00
Drawbar Pin - This Drawbar Pin is used on John Deere 820, 920, 1020, 1120, 1520, 2020, 2120, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 300B. It replaces AT19850 (Item #: 155271, Ref: AT19850)$37.00
No Picture
Front Drawbar Pin Adapter, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300B, 302, 302A, 401B, 401C, 401D, Replaces John Deere OEM number L31849, For a new version of this item use Item #: 155462, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436163)$4.01
Front Drawbar Support, Used - For John Deere tractor models 820, 830, 840, 920, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300B, 302, 302A, 401B, 401C, 401D, Replaces John Deere OEM number AL27203, For a new version of this item use Item #: 155460, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 455460)$38.40
Front Drawbar Support, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos T21672, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497258)$60.01
Front Pull Arm, Left Hand - Left Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Item #: 160666, Ref: AT30151)$367.00
Front Pull Arm, Right Hand - Right Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640. (Item #: 128486, Ref: AT30150)$380.00
Hydraulic Lift Arm, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2355N, 2440, 2630, 2640, 2755, 2855N, Replaces John Deere OEM number T29931, For a new version of this item use Item #: 125402, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425402)$93.01
Leveling Arm Screw - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Leveling Arm Screw is 17.50 inches long. Replaces T25835 (Item #: 165768, Ref: T25835)$24.37
Leveling Arm Screw - Measuring 15.187 inches over all length, this Leveling Arm Screw is used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces T24908 (Item #: 110317, Ref: T24908)$23.94
Leveling Assembly Housing - Used with telescoping 3pt pull arms, the rod on this Housing Assembly is 15.00 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-15, L2837415 (Item #: 109393, Ref: L2837415)$153.00
Leveling Assembly Housing - Used with non-telescoping 3pt pull arms, the rod on this Housing Assembly is 17.50 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-17, L2837417 (Item #: 111632, Ref: L2837417)$151.84
Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Item #: 118291, Ref: T21559)$17.00
Lift Arm Pin - This Lift Arm pin is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It replaces original part number AR55695, T22714 (Item #: 162626, Ref: AR55695)$10.20
Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 17.50" (hole-to-hole) lift link rod. Fits 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Item #: 156785, Ref: AR44556)$79.00
Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable (while in use). Min / Max Length: 21-1/2 inches - 28 inches. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. Replaces AR44554, T25836, R48595, T21901 (Item #: 121432, Ref: AR44554)$76.00
Lift Link Assembly, Right Hand - Right Hand. 15 inch rod length. Closed length 21-1/4" Extended length 27-1/2" For tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. R48595, RE16370, T24908 (Item #: 108552, Ref: AR44552)$150.00
Lift Link Assembly, Right Hand - Right Hand. 17.5" rod length Closed Length: 23" Extended Length: 29-1/2". Housing Assembly. For: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Item #: 150871, Ref: AR44551)$115.00
Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Item #: 176718, Ref: T21558)$32.02
Lift Link Rod - Used on the non-adjustable lift arm, this Lift Link Rod measures 19.125 inches overall. It includes T21901 Lift Rod Ball. (Item #: 110530, Ref: T24909)$82.00
Lift Link Rod - For John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lift Link Rod, comes with T21901 Lift Rod Ball. The overall length is 21.750 inches long. (Item #: 109389, Ref: T25836)$85.98
No Picture
Lift Link Rod - 17 1/2 Long For Non-Adjustable Lift Link For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755 (Item #: 110530, Ref: R3113)$82.00
Load Control Shaft - This Load Control Shaft measures 19.69 inches long and .815 Diameter. Also replaces T26598. 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1650, 1750, 1850, 2040, 2150, 2155 serial number 651779 and earlier, 2240, 2255, 2355, 300, 300B, 301, 301A, 302, 302A Replaces John Deere OEM nos L26932, T26598 (Item #: 122137, Ref: L26932)$51.00
Lower Lift Arm Ball - Measuring 3/4 inch inside diameter, 1 3/16 inch outside diameter, and 1 3/8 inch wide. This part replaces John Deere part number T21901. Used on John Deere 1020, 1530, 2020, 2030, 2040, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2855N, 2940, 2950, 3030, 3055, 3150, 3155, 820, 830 (Item #: 112054, Ref: T21901)$9.80
Lower Lift Yoke - Used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lower Lift Casting replaces John Deere part number R48595 (Item #: 111346, Ref: R48595)$42.00
Lower Link Adapter Nut - Used on telescoping lower lift arms, this is a 1-5/8 inch adapter nut. It replaces John Deere part number T21758 (Item #: 173022, Ref: T21758)$21.90
Outer Load Control Bushing - For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1750, 1850, 2040, 2150, 2155, 2240, 2255, 2355, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, Replaces John Deere OEM number T22099, (Item #: 122136)$6.50
No Picture
Pull Arm - Left or Right Hand Heavy Duty - Non-Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, 2640, 2750, 2755, 2855 (Item #: 111387, Ref: R3128)$320.00
Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Item #: 111387, Ref: AR77530)$320.00
Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 and 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Item #: 108900, Ref: AR28570)$155.00
Sway Block Support Plate - Left Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2750, 2755, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT20168, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498403)$49.01
Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R)$12.00
Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R)$1.50
Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R)$1.40
Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R)$2.70
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716)$0.80
Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R)$0.70
Top Link Bracket - For Category I hitches on: 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855. (Item #: 160341, Ref: T21685)$43.00
Top Link Bracket, Used - For John Deere tractor models 820, 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2130, 2140 (s/n 430000-later), 2240, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number T21685, For a new version of this item use Item #: 121440, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421440)$24.01
Coupling, Front Drive Shaft - This Front Drive Shaft Coupling is used on front Hydraulics on multiple John Deere Models. It is used with L34569 Coupling and R78202 Cushion. Replaces Original Part Numbers: L34432, T58194 (Item #: 154893, Ref: L34432)$15.90
Drive Pin for Coupler Drive - This Drive Pin for Coupler Drive is used on front Hydraulics on multiple John Deere Models. It has 9/16 inch Thread Length. It Threads into the Coupler End. It replaces John Deere Part Numbers AT42308, AT42311, AT42312, R34360 (Item #: 108512, Ref: R34360)$3.70
Engine Oil Filler Cap, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 2940, 3040, 3120, 3140, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8870, 8960, 8970, Compatible with John Deere Combine(s) 3300, 4400, 4420, 4425, 4435, 6600, 6620, 7700, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, Compatible with John Deere Harvester(s) 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 9900, 9910, 9920, 9930, 9940, 9950, 9960, Compatible with John Deere Construction and industrial models 210, 300 (Series), 415, Compatible with John Deere Hay Cutting(s) 2280, 2320, 2360, 2420, 3430, 3830, Compatible with John Deere Sprayer(s) 6000, Replaces John Deere OEM nos T20294, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498475)$10.01
Hydraulic Coupler Bushing, Set of 4 - Hydraulic Coupler Bushing Kit is used on Front Hydraulics Couplings. It fits multiple John Deere Models. Replaces Original John Deere Part Numbers R45822, AR45822, AR49427 (Item #: 111302, Ref: R45822)$2.90
Hydraulic Coupler Conversion Kit, Female and Male - For John Deere tractor models 1020, 1030, 1130, 1520, 1530, 1630, 2020 (USA models only), 2030 (USA models only), 2040 (USA models only), 2130, 2240, 2440, 2520, 2630, 2640, 2840, 2940, 3010 (For Machines Equipped with Dual Block Only), 3020, 3030 (Utility), 3130, 4000, 4010 (For Machines Equipped with Dual Block Only), 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520 (72-75), 8430 (75-78), 8440, Replaces John Deere OEM number RE12121, AR94522, RE206778, Converts John Deere remote couplers to ISO/Pioneer couplers, Includes: Rubber Caps, Style: Cartridge, Style: Lever, Body Size: 1/2", (Item #: 185490)$205.00
Hydraulic Coupler, RH, Used - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 3030, 3040, 3120, 3130, 3140, Compatible with John Deere Construction and industrial models 300, 300B, Replaces John Deere OEM nos T22243, RH Hand Coupler for Single Hydraulics, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499333)$263.01
Hydraulic Pump Drive Coupler, Front, Used - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4850, 4955, 4960, 8450, 8560, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 210, 300, 310, 315, 415, 515, Replaces John Deere OEM number L34569, For a new version of this item use Item #: 154894, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499212)$5.01
Hydraulic Pump Drive Coupler Half - Two required for 1 complete coupler. For tractor models JD300, JD301, JD400, 301A, 302, 3030, 3120, 3130, 401B, JD380, 401C, 480C, (830, 930 SN# 258366 and up), (1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 300B, 1030 all with small pump). (Item #: 113925, Ref: R38348)$12.30
Hydraulic Pump Drive Coupler, Rear, Used - For John Deere tractor models 940, 1040, 1140, 1550, 1640, 1750, 1840, 1850, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 210, 300, 310, 315, 415, Replaces John Deere OEM number L34432, For a new version of this item use Item #: 154893, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499211)$5.01
Hydraulic Pump Drive Coupling - Hydraulic Pump Drive Coupling is used front Hydraulics on multiple John Deere Models. It is used with L34432 Coupling and R78202 Cushion. Replaces L34569, T58195 (Item #: 154894, Ref: L34569)$15.80
Hydraulic Pump Drive Cushion - Hydraulic Pump Drive Cushion is used front Hydraulics on multiple John Deere Models. It is used between L34432 Coupling and L34569 Coupling. Replaces R78202, T58196 (Item #: 114011, Ref: R78202)$7.90
Hydraulic Pump Drive Cushion, Used - For John Deere tractor models 1040, 1640, 1840, 2040, 2040S, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 3640, 4040 (European), 4050, 4055, 4240 (European), 4250, 4255, 4350, 4440 (European), 4450, 4455, 4555, 4560, 4640 (Power Front Wheel Drive), 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8400, 8450, 8650, 8850, 9400, Compatible with John Deere Harvester(s) 9950, 9960, 9965, 9970, Compatible with John Deere Construction and industrial models 210C, 300B, 300D, 301A, 302A, 310A, 310C, 310D, 315C, 315D, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 444C, 444CH, 482C, 500C, 510, 510B, 510C, 510D, 515B, 570B, 610B, 610C, 644C, 710B, 710C, 710D, 762A, 762B, Replaces John Deere OEM number R78202, T58196, For a new version of this item use Item #: 114011, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 414011)$4.71
Hydraulic Pump Drive Shaft - Hydraulic Pump Drive Shaft is used on 940, 1040, 1140, 1550 before serial 621999, 1750 before serial number 621999, 1850 before serial number 621999, 2040, 2150, 2155 before serial number 621999, 2240 after serial number 350000, 2255. Pump drive shaft is 4.654 inches (118.22mm) long overall, inside diameter of 0.867 inches (22.04mm) with key way. Replaces original part numbers L34570 (Item #: 160342, Ref: L34570)$19.98
Hydraulic Pump Drive Shaft Coupler, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2130, 2240, 2440, 2630, 2640, Replaces John Deere OEM number T22914, Length: 4.770", Key Hole: .877", For a new version of this item use Item #: 121446, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421446)$23.01
Hydraulic Pump Drive Shaft, Used - For John Deere tractor models 940, 1040, 1140, 1550 (s/n 621999-earlier), 1750 (s/n 621999-earlier), 1850 (s/n 621999-earlier), 2040, 2150, 2155 (s/n 621999-earlier), 2240 (s/n 350000-later), 2255, Replaces John Deere OEM number L34570, For a new version of this item use Item #: 160342, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429332)$22.01
Hydraulic Pump Spring Pack - Set of 8 - For John Deere tractor models 830, 930, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2630, 2640, 3030, 3120, 3130, Compatible with John Deere Harvester (s) 7440, 7445, 9920, 9930, 9940, 9950, Replaces John Deere OEM number AL71018, AR39041, Sold as a set of 8 springs, (Item #: 113898)$3.98
Remote Break-Away Coupler, LH, Used - For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 2940, Replaces John Deere OEM number AR39037, Replaces John Deere Casting nos R39110, Casting No. R39110, Left Hand Side, For a Remanufactured version of this part use Item #: 204616, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404616)$410.01
Remote Break-Away Coupler, RH, Remanufactured, AR39036 - For John Deere tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 2940, Replaces John Deere OEM number AR39036, Replaces John Deere Casting number R39109, Right Hand Side, (Item #: 207101)$564.01
Remote Break-Away Coupler, RH, Used - For John Deere tractor models 940, 1020, 1040, 1140, 1520, 1530, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2240, 2440, 2630, 2640, 2840, 2940, 3030, 3130, Replaces John Deere Casting number R39109, Replaces John Deere OEM nos AR39036, Right Hand Side, For a Remanufactured version of this part use Item #: 207101, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499381)$350.01
Selective Control Valve Lever, Used - For John Deere tractor models 1020, 1120, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2240, 2350, 2440, 2550, 2640, 2750, 7020 (s/n 001816-earlier), Replaces John Deere OEM nos T23069, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430407)$77.01
Selective Control Valve, Remanufactured - For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040 (s/n 266750-later), 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3030, 3130, 7020 (s/n 001816-earlier), All models listed without SoundGard cabs, 1st Valve, Poppet type, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203670)$968.01
Selective Control Valve, Remanufactured - For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040 (s/n 266750-later), 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3030, 3130, 7020 (s/n 001816-earlier), All models listed without SoundGard cabs, 2nd Valve, Poppet Type, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 203671)$1065.01
Selective Control Valve Side Cover, Used - For John Deere tractor models 1020, 1120, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2240, 2350, 2440, 2550, 2640, 2750, 7020 (s/n 001816-earlier), Replaces John Deere OEM nos R39289, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430411)$89.01
Selective Control Valve, Used - For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040 (s/n 266750-later), 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3030, 3130, 7020 (s/n 001816-earlier), Replaces John Deere OEM number AR40828, AR40824, 2nd Valve, Poppet Type, For a Remanufactured version of this part use Item #: 203671, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403671)$625.01
Selective Control Valve, Used - For John Deere tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040 (s/n 266750-later), 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3030, 3130, 7020 (s/n 001816-earlier), 1st Valve, Poppet type, For a Remanufactured version of this part use Item #: 203670, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403670)$540.01
Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116)$14.70
Flasher Control Switch - Used on John Deere, Case, International and Allis Chalmers equipment, this Flasher Control Switch replaces OEM numbers 71362888, 87271837, 131209C91, 131066C91, AR64422 (Item #: 150918, Ref: AR64422)$76.00
Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1)$5.40
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED)$33.00
Light Bezel - Our rubber light bezel can be used as front, rear or both, when using a guide style light without Glare Guard. The bezel has an outer diameter of 5.045 inch, inner diameter of 3.250 inch, measures 1.325 in width, and has 4 inner slots. Replaces 10P2571, 164475A, R31250 (Item #: 184424, Ref: R31250)$25.30
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91)$9.10
Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Item #: 123453, Ref: T12443)$45.00
Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Item #: 123454, Ref: R27460)$13.50
No Picture
Light Switch, 5 Position - 5 terminal. For tractor models 1040, (830 3-cyl), 920, 1140, 1630, 1640, 1830, 2030, 2040, 2040S, 2240, 2440, 2630, 2640, 2840, (3030, 3130 from SN# 162948 and up), 300B, (2150, 2155, 2255, 2355, 2550, 2555, 2755, 2855, 2940, 2950 without Sound guard cab). Knob Not Included, use part number AR66799 for knob. (Item #: 125707, Ref: AR66478)$35.00
Gearshift Lever, Used - For John Deere tractor models 820 (3 cylinder, s/n 092219-later), 830 (3 cylinder, s/n 092219-later), 930, 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2120, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B (s/n 252675-later), 301 (s/n 252675-707399), 301A (s/n 252675-707399), 302 (s/n 252675-707399), 302A (s/n 252675-707399), 400, 401 (s/n 252675-later), 401B (s/n 252675-707399), 401C (s/n 252675-707399), Replaces John Deere OEM number R53817, For a new version of this item use Item #: 152054, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436097)$18.48
Guide - Hydraulic Pump - For John Deere tractor models 830 (3 Cyl.), 930, 940, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640, 3030, 3120, 3130, 3135, Compatible with John Deere Construction and industrial models 300, 301, 301A, 302, 400, 401, 401B, Replaces John Deere OEM number R39070, (Item #: 161848)$2.90
Hydraulic Control valve, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2040 (s/n 34999-earlier), 2130, 2240 (s/n 34999-earlier), 2630, 2840, 3030, 3120, 3130, Compatible with John Deere Construction and industrial models 301A (s/n 366217-later), 302 (s/n 340999-earlier, 366217-later), 401B (s/n 366217-later), Replaces John Deere OEM nos R39273, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432406)$175.01
Hydraulic Oil Cooler, Used - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2130, 2240 (s/n 349999-earlier), 2440 (s/n 341000-later), 2630, 2640, Compatible with John Deere Construction and industrial models 300B, 301, 301A, 302, 302A, 401, 401B, 401C, 401D, 480, Replaces John Deere OEM number AR69398, AT20848, AL71285, AT165535, AT169229, AT77459, AL32639, For a new version of this item use Item #: 121811, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421811)$175.01
Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 serial number 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. Note, there are a couple different styles of this part that work equally well, but are cosmetically different. Yours may arrive looking different than the one shown. Replaces AF3882R, AR27977, AT85174 (Item #: 121439, Ref: AR27977)$10.50
Bearing Housing, without Bearing - For tractor models 820, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, (2240 SN# up to 349999), 2440, 2630, 2640. (Item #: 170410, Ref: T21996)$219.00
John Deere, AL55075, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2440 (s/n 341000-later), 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM number AL55075, AL28723, For a new version of this item use Item #: 127044, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449892)$11.01
PTO Bearing Housing / Quill - This is the Bearing Housing / Quill, Rear PTO Shaft used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400. Replaces T22237, R47514 (Item #: 172961, Ref: R47514)$231.00
PTO Brake Band - This PRO Brake Band is used on John Deere 1020, 1520, 2020, 830, 930, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 301A, 401B, 401D. Replaces AR58605 and RE44253 (Item #: 163796, Ref: RE44253)$80.00
PTO Clutch Disc - 45 internal splines, 5.250" O.D.. For tractor models (1020, 1520, 2020, 2640 with hi-lo shift), (1530 SN# xxxxxx and up), (2030, 2630 with hi-lo shift and SN# xxxxxx and up), 2240, (2440, 2640 with ind. 540-1000 PTO and hi-lo trans.), 2940, 2955. Replaces AR78361. (Item #: 127048, Ref: AR108105)$12.00
PTO Clutch Drum, Used - For John Deere tractor models 2040, 2140, 2150, 2155, 2240 (s/n 350000-Later), 2250, 2350, 2355, 2440 (s/n 3410000-Later), 2550, 2555, 2640 (s/n 3410000-Later), 2750, 2755, 2855, 2940, 2950, 3055, 3150, 3255, Replaces John Deere OEM nos AL39262, AL35664, Replaces Casting nos L41449, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497310)$349.01
PTO Clutch Drum, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 350000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2155, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440 (s/n 341000-later), 2541, 2550, 2555, 2640 (s/n 341000-later), 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM nos L33312, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434751)$194.01
PTO Clutch Plate - 5.20" O.D., 3.903" I.D., .179" thick. For tractor models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. AL23113, AT32058. (Item #: 127061, Ref: L33563)$19.30
PTO Clutch Plate, Used - For John Deere tractor models 1640 (s/n 430000-later), 1641, 1641F, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2141, 2150, 2240 (s/n 350000-later), 2251, 2251N, 2255, 2350, 2351, 2355, 2440 (s/n 341000-later), 2541, 2550, 2555, 2651, 2750, 2755, 2855N, 2940, 2941, 2950, 2951, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3141, 3150, 3155, 3255, 3351, 3641, 3651, Replaces John Deere OEM number L33125, For a new version of this item use Item #: 127060, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449891)$5.01
PTO Clutch Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, Replaces John Deere OEM nos L33317, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431325)$176.01
No Picture
PTO Friction Disc - PTO FRICTION DISC For 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2440 LESS HI-LO, 2630, 2640, 2640 LESS HI-LO, 2840 (Item #: 127057, Ref: TP-RE37011)$8.90
PTO Plate, Remanufactured, AT21675 - For John Deere tractor models 301, 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2250, 2350, 2440, 2450, 2550, 2630, 2640, Replaces John Deere OEM number AT21675, AL19092, Clutch Size: 9", Clutch Hub: 1-1/2", Clutch Spline: 23, Clutch Center: Spring, For a New version of this sku use Item #: 150755, (Item #: 205870)$109.01
PTO Shaft - This PTO Shaft is 31.250 long, 6 spline, 540 RPM. It is used on some of the following: 1020 (W/ HEAVY DUTY PTO BEARINGS), 1030, 1040 (Serial Number 437370 and up), 1120 (W/ HEAVY DUTY PTO BEARINGS), 1130, 1140 (SN 437370>), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (Serial Number 350000 and up), 2130, 2140, 2150, 2155, 2240 (Serial Number 350000 and up), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, 820 (3 Cyl.) (W/ HEAVY DUTY PTO BEARINGS), 840 (Serial Number 437370 and up), 920 (W/ HEAVY DUTY PTO BEARINGS), 940 (Serial Number 437370 and up) It replaces L28712, L38806. Verify measurements and OEM Numbers. (Item #: 162347, Ref: L38806)$386.00
PTO Shaft - 540 RPM, Used - For John Deere tractor models 820 (3 Cyl., Witth Heavy Duty PTO Bearings), 840 (s/n 437370-later), 920 (Witth Heavy Duty PTO Bearings), 940 (s/n 437370-later), 1020 (Witth Heavy Duty PTO Bearings), 1030, 1040 (s/n 437370-later), 1120 (Witth Heavy Duty PTO Bearings), 1130, 1140 (s/n 437370-later), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (s/n 350000-later), 2130, 2140, 2150, 2155, 2240 (s/n 350000-later), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, Replaces John Deere OEM number L38806, 31.250" Long, 6 Spline, For a new version of this item use Item #: 162347, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 442502)$206.01
PTO Shaft Seal - This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Item #: 128541, Ref: 70241779)$7.70
PTO Shaft, Used - For John Deere tractor models 301, 820, 830, 1020, 1030, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040 (s/n 430000-later), 2140 (s/n 430000-later), 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300B, 301A, 302, 302A, 401B (s/n 339687-later), 401C, 401D, Replaces John Deere OEM number R69509, Splines: 6 and 21, Length: 31 1/4", Raised section on shaft for bearing guides., With snap rings use Item #: 498486, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429331)$390.01
PTO Shift Collar, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2755, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM nos T26337, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 437950)$60.01
Seats
Wrap Around Seat Assembly - Yellow - For tractor models 1020, 1030, 1120, 3030, 3040, 3130, 3140, 820, 830, 920, 930, 2280, 2320, 2420, 2150, 2155, 2240, 2250, 2350, 2355, 2440 Late, 2550, 2555, 2640 Late, 2750, 2750, 2840, 2940, 2950, 2955. Add an Additional $15 for shipping due to weight. (Item #: 101375, Ref: W222YL)$100.00
Sheet Metal / Body Parts
No Picture
Battery Cover - Battery Cover for JD 820, 830, 1020, 1030, 1120, 1130, 1530, 1630, 1830, 2020, 2030, 2120, 2130, 2240, 2440, 2630, 2640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104081, Ref: S-AT20026)$39.00
Battery Cover - For 820 with 3 cyl, 830 with 3 cyl, 1020, 1030, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640. Battery Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104081, Ref: AT20026)$39.00
Fender Extension, LH - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AL25635, AL66516 (Item #: 103963, Ref: AL66516)$26.60
Fender Extension, RH - This Fender Extension, (Side Step) is for tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2150, 2155, 2240, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 830, 920, 930. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103962, Ref: AL66515)$20.98
Fender, LH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, LH. Fender, shell style with braces and brackets welded in place. Comes primed. Replaces AR51407, AR51408, AT20779, AT27148. (Item #: 103961, Ref: AL28585)$120.00
Fender, RH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, shell style with braces and brackets welded in place. Comes primed. Fender, RH. Replaces AT20777, AT27146. (Item #: 103960, Ref: AL28584)$120.00
Fender Set - Right Hand and Left Hand - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1040, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, 480, Replaces John Deere OEM number AL28584, AL28585, AT20777, AT20779, Left Hand and Right Hand Set, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender - Right Hand use Item #: 103961, Additional Handling and Oversize Fees Apply To This Item, (Item #: 140628)$265.00
Nose Cone - Replacement nose cone is made of a reinforced fiberglass material which will give great resistance to impact and vibration cracking.Does not come with hardware. Used on 1030, 1130, 1630, 1830 serial number 181606 and above, 2030 serial number 181606 and above, 2040 below serial number 349999, 2130 Serial number 181606 and above, 2240 below serial number 349999, 2440 below serial number 349999, 2640 below serial number 349999, 830 3 Cylinder (European Edition), 930 (European Edition). Parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103966, Ref: R59961)$56.00
Nose Cone - For 2040, 2240, both after serial number 349999. For 2940, 4030, 4040, 4230. Dimensions: 11 inches tall x 21 inches wide x 2-1/2 inches in depth. Nose Cone is fiberglass and needs painting. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103967, Ref: R52362)$59.00
Side Screen - For John Deere tractor models 940 (European Edition), 1040 (European Edition), 1140 (European Edition), 2040 (Utility model, s/n 350000 and later), 2150, 2240 (s/n 350000 and later), 2255, Replaces John Deere OEM number AL31253, AL56760, AL60652, 17" x 17", Bottom holes are 12" center to center, Comes primered (color may vary). Prior to painting check fitment, (Item #: 118499)$83.51
Side Screen - POWDER COAT GREEN 13 3/4 inches x 17 inches. For 820 (German), 830, 1020, 1530, 2040, 2240. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. 2 used per tractor. (Item #: 101931, Ref: AR72949)$65.00
Step Assembly - For 830 Utility, 1020, 1520, 1530, 1830, 2020, 2030, 2040 before SN# 349999, 2130, 2240, 2440, 2630, 2640, 2840. OEM# F3195R. Verify OEM number, may not fit some late models. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 187176, Ref: R3879)$72.00
Tractor Mirror Assembly with Retractable Arm - Right and Left Hand, Used - For John Deere tractor models 1030, 1040, 1050, 1130, 1140, 1250, 1450, 1530, 1630, 1640, 1650, 1830, 1840, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850 (Fits tractors with Sound-Gard cabs only), Replaces John Deere OEM number AL78021, AL77484, Fits Left Hand or Right Hand Side, Kit includes 8" x 11" wide-angle convex mirror head, Mirror length from cab frame to mirror head is 22"-36", Easily adjustable and extendable 14", 8" x 11" Mirror, Sound-Guard, For a new version of this item use Item #: 109591, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435450)$101.01
Tractor Mirror Assembly with Retractable Arm, Right Hand or Left Hand - For John Deere tractor models 1030, 1040, 1050, 1130, 1140, 1250, 1450, 1530, 1630, 1640, 1650, 1830, 1840, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3040, 3055, 3130, 3140, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850 (Fits tractors with Sound-Gard cabs only), Replaces John Deere OEM number AL78021, AL77484, Fits Left Hand or Right Hand Side, Kit includes 8" x 11" wide-angle convex mirror head, Mirror length from cab frame to mirror head is 22"-36", Easily adjustable and extendable 14", Powder coat finish, All hardware included, Detailed installation instructions included, (Item #: 109591)$210.00
Steering
Axle Carrier Housing, LH - Used on ZF Axle APL1351. This left side hub carrier replaces OEM numbers L35603, P4468358031, 3230954R1, 83953218. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124660, Ref: L35603)$250.00
Axle Carrier Housing, RH - Used on ZF Axle APL1351. This right side hub carrier replaces OEM numbers L35604, ZP4468358032, 3230955R1, 83953219, ZP1927585. Verify axle number before ordering. For John Deere models 940, 1040, 1140, 1640, 1840, 2040, 2040S, 2240, 1550, 1750, 1850, 2150. (Item #: 124661, Ref: L35604)$243.00
Axle Knee, Left Hand, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models TC44H, TC54H, TC62H, 300, 301, 400, 401, 444H, 444HLL, 450J (s/n 159986-earlier), 544H, 544HLL, 550J (s/n 159986-earlier), 550K (s/n 217276-275527, 275977-303907), 624H, 624HLL, 650J (s/n 159986-earlier), 650K (s/n 216396-275533, 275978-303837), Replaces John Deere OEM number AT22222, Replaces John Deere Casting nos T21512, Left Hand, Swept Back Axle, Height: 9 1/2", For Axle Knee, Right Hand use Item #: 430382, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430383)$234.01
Axle Knee, Right Hand, Used - For John Deere tractor models 301, 820, 830, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2150, 2240, 2255, 2440, 2630, 2640, Compatible with John Deere Lawn and Garden(s) 300, 400, Replaces John Deere OEM number AT22221, Replaces John Deere Casting nos T21511, Right Hand, Swept Back Axle, Height: 9 1/2", For Axle Knee, Left Hand use Item #: 430383, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430382)$234.01
Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349)$249.00
Axle Shaft and Yoke, MFWD - Used on ZF APL1351 Mechanical Four Wheel Drive front end, this shaft is 9.39 inches long with 21 teeth. Replaces OEM numbers 3216599R91, 81927571, AL32883, ZP1927571. John Deere models 940, 1040, 1140, 1550, 1750, 1850, 2040, 2040S, 2140, 2150, 2240 (Item #: 115716, Ref: AL32883)$169.00
Axle Shaft with Yoke - Used on ZF APL351 Mechanical Four Wheel Drive front ends, this shaft and yoke is 35.50 inches from center of the u-joint to the end. It has 21 teeth. This part replaces OEM numbers ZP1927573, 3230278R1, AL32884. John Deere 940, 1040, 1140, 1550, 1750, 1840, 1850, 2040, 2040, 2040S, 2140, 2150, 2240 (Item #: 160162, Ref: AL32884)$338.00
Bellcrank - For tractor models (2440, 2640 serial number up to 308804 with 49 inch-79 inch swept back adj. axle), (2040, 2240 serial number up to 349999 with swept back adj. axle), (1530 with straight or swept back adj. axles), (JD301, JD401, 2630, 820, 830 with swept back adj. axle), (1020, 2020, with 44 inch-66 inch or 48 inch-78 inch swept back adj. axle), (1520 with 48 inch-78 inch swept back adj. axle), (JD300, JD400 without loader/backhoe with swept back adj. axle). (Item #: 104915, Ref: AR92944)$229.98
Bellcrank - Casting #T21504. For tractor models (300, 301, 400, 401, 820, 830, 1020, 1520, 1530, 2020, 2630 all with swept back axle), (2030 SN# up to 187300 with swept back axle), (2040, 2240 SN# up to 349999 with swept back axle), (2440, 2640 SN# up to 308804 with swept back axle). (Item #: 104914, Ref: AT19794)$300.00
Bellcrank - Includes AR92945 pin. For (1020, 2020 all with 60 inch-88 inch, 48 inch-80 inch or 58 inch-92 1/2 inch Straight Adj. front axle) 1520 with 48 inch-60 inch or 60 inch-88 inch Straight adj. front axle, 1530 with Extra Wide Front Axle, 2240 with 60 inch-88 inch or 58 inch-76 inch Straight adj. Front Axle, (2440, 2640 all serial number less than 308804 with 60 inch-88 inch or 58 inch-76 inch Straight adj. front axle), 2630 with 60 inch-88 inch Straight adj. front axle. Bellcrank marked R70764. (Item #: 104917, Ref: AR92945)$186.00
Bellcrank, Used - For John Deere tractor models 820, 830, 920, 1020, 1120, 1530, 2020, 2030 (s/n187300-earlier W/Swept Back Adjustable Axle), 2040, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number AT19794, Replaces Casting nos T21504, For a new version of this item use Item #: 104914, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404914)$184.01
Center Steering Arm Pin - Please check dimensions before ordering. Pin is 5.690" long X 1.499" diameter. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Center Steering Arm Pin. Used with Center Steering Arms: AR91812, AR92945, AR91811 and AR92944. (Item #: 173277, Ref: 91811S)$45.00
Center Steering Arm Pin Bushing - Measuring 1.500 inches inside diameter, 1.875 inches outside diameter and 1.000 inches wide, this bearing is used on John Deere models: 820, 1020, 1520, 2020, 3120, 830, 1530, 2630, 3030, 3130, 2040, 2240, 2444, 2640, 2840, 2150, 2155, 301, 302, 401, 401B (Item #: JD8827)$21.76
Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137)$1.98
No Picture
Differential Cross Shaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, Compatible with John Deere Combine(s) 1165, 1175, 4425, 4435, Replaces John Deere OEM nos L29226, T21875, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436093)$20.01
Differential Lock Pedal, Used - For John Deere tractor models 820, 830, 920, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 478686-earlier), 1830, 2030, 2040, 2040S (s/n 478686-earlier), 2240, 2440, 2640, Replaces John Deere OEM nos T27430, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434013)$66.01
Drag Link Assembly - 35.781 Long For 820, 830, 1020, 1520, 1530, 2040, 2240 (To S#349999). (Item #: 102274, Ref: AR68818)$77.00
Drang Link Shaft Cover Gasket - For John Deere tractor models 830 (3 Cyl.), 840, 930, 940, 1030, 1040, 1130, 1140, 1350, 1550, 1630, 1750, 1830, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2355N, 3030, 3130, Replaces John Deere OEM number L62423, L35654, T21527, (Item #: 161827)$3.30
Front Axle Pin - This Pin Measures 1.575 inches outside diameter and is 3.735 inches long. Replaces John Deere part numbers L55437, AL55410, 47M7003, L34070 (Item #: 161647, Ref: L55437)$27.40
Hub - For tractor models 300, 301, 400, 401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 serial number under 340999. Hub, 6 Bolt. Uses wheel bolt # WB916 9/16-18 x 1.69 inch. (Item #: 104768, Ref: T25809)$50.00
Pivot Pin - Rear - For John Deere tractor models 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 380, 400, 401, 401B, 401C, 401D, 480, 480A, 480B, 480C, Replaces John Deere OEM number R54195, Length: 4.100", Diameter: 1.5727", (Item #: 128476)$46.00
Planetary Drive Shaft - Left Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1630, 1640 (s/n 430000-later), 1830, 2020 (s/n 430000-later), 2030, 2040 (s/n 430000-later), 2150 (s/n 430000-later), 2240 (s/n 350000-later), 2255 (s/n 430000-later), 2350, 2440 (s/n 340999-earlier), Replaces John Deere OEM number L34353, L41167, T28908, T21820, T31086, T71926, Left Hand, Splines: 23, Teeth: 12, For a new version of this item use Item #: 126904, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430032)$89.01
Planetary Ring Gear - Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Item #: 164180, Ref: L40010)$339.00
Planetrary Drive Shaft - Right Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 350000-earlier), 2040 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-earlier), 2255, 2350, 2440 (s/n 340999-earlier), Replaces John Deere OEM number L41166, T28907, L34168, T21821, Right Hand, Splines: 23, Teeth: 12, For a new version of this item use Item #: 126897, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430033)$100.01
Power Steering Overhaul Kit - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, Replaces John Deere OEM number AT315816, (Item #: 115328)$91.98
Power Steering Shaft - This Power Steering Shaft is used on John Deere 820, 830, 1020, 1520, 2020, 1030, 1530, 2030, 2130, 2630, 2040, 2240, 2640, 2150, 2350, 2155, 2355, 300, 400, 310, 401, 302. Replaces L29199 (Item #: 112629, Ref: L29199)$242.98
Power Steering Valve Tie Rod - This Power steering valve tie rod measures 5.625 inches (136.25mm) Center to Center, an Inside Diameter of 0.624 inch (15.86mm) on one side and 0.75 inch (19mm) on the other side. Used on 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, 300 Indust/Const, 301 Indust/Const, 310 Indust/Const, 400 Indust/Const, 401 Indust/Const, 820, 830 It replaces original part number T25324 (Item #: 162164, Ref: T25324)$101.00
Rear Cast Wheel Pinion Gear, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2010, 2020, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2141, 2240, 2350, 2440, 2510, 2520, 2541, 2550, 2630, 2640, 2750, 2755, 2840, 2940, 2941, 2950, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 3141, 3150, 3641, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7020, 7200, 7400, 7520, Replaces John Deere OEM nos B3014R, Teeth: 2 (inside) 14 (outside), Inside Diameter: .85", Outside Diameter: 2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434488)$82.01
Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539)$12.10
Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T)$4.70
Spindle LH/RH - Shaft length 15.312 inches, shaft diameter 1.375 inch spindle inside bearing flat 1.375 inch, spindle outside bearing flat 842 inch. REPLACES: AR52860. Fits 1020, 1520, 1530, 2020, 2030, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 2755. Wheel Bearing Kit available separately, part number WBKJD3. (Item #: 102211, Ref: AR103471)$190.00
Spindle LH/RH - Vertical shaft length 11.875 inches, shaft diameter 1.375 inches, spindle inside bearing flat 1.375 inch, spindle outside bearing flat .842 inch. Keyway is to the rear. REPLACES: AR52861. Fits 1020, 1520, 1530, 2020 (swept back), 2030, 2040, 2240, 2440 (< serial number 340999), 2630, 2640 (< serial number 340999), 820, 830. Wheel Bearing Kit available separately part number WBKJD3. Replaces AR103472, AR52861. (Item #: 102210, Ref: AR103472)$154.00
Spindle LH/RH - Measures A = 9.875 inch, B = 1.375 inch C = 1.375 inch, D =.842 inch. REPLACES OEM numbers: AR52862, AR58608. Fits: 1020 and 1520 (swept back), 1530, 1641, 1641F, 2020 (swept back), 2030 (< serial number 187300), 2040, 2240, 820, 830. Wheel Bearing Kit available separately as part number WBKJD3. (Item #: 102212, Ref: AR103473)$144.00
Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T)$2.80
Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118)$9.90
Steering Arm - Left Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21619, Fits Left Hand Side, For Right Hand Side use Item #: 104957, (Item #: 104956)$161.00
Steering Arm - Left Hand, Used - For John Deere tractor models 1950N, 2150, 2155, 2240, 2251N, 2355, 2355N, 2440, 2640, 2855N, Compatible with John Deere Construction and industrial models 301, 301A, 302, 401, 401B, Replaces John Deere OEM number T36705, Left Hand, For a new version of this item use Item #: 104949, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404949)$95.01
Steering Arm, LH, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2355N, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21518, Left Hand, With Swept Back Front Axle, For a new version of this item use Item #: 104954, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404954)$75.01
Steering Arm Pin, Center - 1.249" diameter, 5.230" long. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Used with AT52868, AT52867, AT19793, AR93359, AR93358 and AT19794 center steering arms. Please check dimensions before ordering. (Item #: 163531, Ref: 93358S)$51.00
Steering Arm - Right Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21618, Fits Right Hand Side, For Left Hand Side use Item #: 104956, (Item #: 104957)$98.98
Steering Arm - Right Hand, Used - For John Deere tractor models 820, 830, 840, 920, 930, 1020, 1120, 1140, 1520, 1530, 1630, 1641, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Replaces John Deere OEM number T21517, Right Hand, For a new version of this item use Item #: 104955, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404955)$50.01
Steering Arm, Used - For John Deere tractor models 820, 830, 920, 930, 940, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2355, 2440, 2630, 2640, 3120, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number T28272, Replaces Casting nos T22525, For a new version of this item use Item #: 163451, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498801)$158.01
Steering Lever, Used - For John Deere tractor models 2040 (s/n 350000-later), 2150, 2240 (s/n 350000-later), 2255, Replaces John Deere OEM nos L37326, L42081, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 452456)$140.01
Steering Shaft, Used - For John Deere tractor models 820, 830 (1020), 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 2840, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM nos T36482, L42079, Replaces John Deere Casting nos T21546, Casting No T21546, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498407)$375.01
No Picture
Steering Valve Assembly - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, AL31515, AL70699, AT23175, RE10800, Only for use with closed center hydraulic system, Tall Housing - 15-1/2", Comes primered (color may vary). Prior to painting check fitment, For a Remanufactured version of this sku use Item #: 205195, (Item #: 109847)$700.00
Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31515, AL31262, AL70699, AT23175, RE10800, Marked L34450, R58041, R77312, R77314, T25295, For a New version of this sku use Item #: 109847, (Item #: 205195)$846.01
Steering Valve Assembly, Used - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, RE10800, AL31515, AL70699, AT23175, For a new version of this item use Item #: 205195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409847)$530.01
Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 and up, 4000, 4020 serial number 201000 and up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Item #: 113508, Ref: T22875)$66.00
Steering Wheel - This steering wheel is 16-5/8" inch diameter and has a 7/8 inch splined hub, with smooth finish. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. The proper cap to order for this steering wheel is part number AL155227. (Item #: 101448, Ref: AL28457-S)$54.00
Tie Rod Assembly - For tractor models (1020, 1030, 1040, 1130, 1140, 1520, 2020, 2030, 2630 with straight axle 48"-80"), (1530 with straight axle and 38" rear tires), 1630, 1640, 2120, (2240 SN# up to 349999 with straight axle and 38" rear tires), (2440, 2640 with straight axle 53"-79"), 840, 940, (JD301, JD401 with straight axle). (Item #: 104787, Ref: AR54637)$116.00
Tie Rod, Inner - Inner Tie Rod. 1-1/8" inner diameter, 5-3/4" to center of post. For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Item #: 102248, Ref: AT27130)$28.80
Tie Rod, Inner - Inner Tie Rod. Dimensions 5.000", 1.000" I.D. Thread For JD300, JD400, 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640 tractors. (Item #: 102250, Ref: AT23886)$35.00
Tie Rod - Outer - For John Deere tractor models 1530, 2020, 2030, 2240, 2440, 2630, 2640, Replaces John Deere OEM number AL39027, Diameter: 0.781", Length: 14.50", 13 Notches, (Item #: 165947)$51.00
Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Replaces AT23885 (Item #: 102249, Ref: AT23885)$27.80
Tie Rod Outer - Tie rod end, outer, notched (13) 14-1/2 to center of post. Straight adjustable front axles. Use with 1-1/8 inner diameter end. Tractors: 53 to 76 heavy duty on tractors: 2030, 2440, 2630, 2640. 53 to 79 heavy duty on tractors: 2640 For 1530, 2020, 2030, 2240, 2440, 2630, 2640 (Item #: 102246, Ref: TP-AT27134)$26.40
No Picture
Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830 (Item #: 102249, Ref: TP-AT23885)$27.80
Tie Rod, Outer - Long Outer Tie Rod. 15 grooves. Dimensions A-17.250 inch b-.750 inch. For tractor models JD 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Item #: 102247, Ref: AT23583)$33.00
Tie Rod Tube - This Tie Rod Tube measures: 7.920 inches long, 0.812 inches inside diameter, 1.125 inch - 12 thread outside diameter. It is used on 1020, 1030, 1040, 1120, 1140, 1530, 1630, 1641F, 1750, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2355N, 2630, 820 (3 Cyl), 830 (3 Cyl), 920. Replaces T29106 (Item #: 104824, Ref: T29106)$24.00
Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867)$43.00
Wheel Hub Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL1351 Mechanical Four Wheel Drive front ends. This part replaces, L35606, ZP1927576, 3216588R1, 81927576. Some of the models listed used more than one 4 wheel drive front end. Verify part number or axle number before ordering. Used on John Deere: 2040 serial number 350000 and up, 2150, 2240 serial number 350000 and up. (Item #: 124686, Ref: L35606)$33.00
Wheels
10" x 15" Front Rim, Used - For John Deere tractor models 1020, 1520, 2030, 2240, 2440, 2630, 2640, 2750, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, Rim Width: 10", Rim Diameter: 15", Holes: 6, Back Side: 5.500", 10X15, For a new version of this item use Item #: 103761, Additional Handling Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403761)$164.01
12" x 28", 6 Loop Rim, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1130, 1530, 2020, 2040, 2150, 2155, 2240, Replaces John Deere OEM nos AL15369, 12x28, Loops: 6, 3 1/2" wide, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 432861)$350.01
No Picture
15" x 24" 6 Loop Rear Rim - For John Deere tractor models 820 (3 cyl), 830 (3 cyl), 920, 1020, 1250, 1450, 1530, 1650, 1850N, 1950N, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2440, 2630, 2640, 4700, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5400N, 5410, 5420, 5420N, 5500N, 5510N, 5520, 5520N, Compatible with John Deere Construction and industrial models 301, 301A, 302, 401, 401B, 401D, Replaces John Deere OEM number AT20521, Width: 15", Diameter: 24", Type: 6 Loop, Can use Rim Bolt Kit 154252, Rim Color: Silver Mist, For 16.9" X 24" Or 17.5" X 24" Tires, (Item #: 110425)$242.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, AL68277, JD3039 (Item #: 116854, Ref: FW55166)$70.00
Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186)$146.00
Front Rim - Front Rim with weight holes. 4.5 inch x 16 inch, 2500 lb. capacity. 6 bolt, 6 inch circle, 4.62 inch pilot for 5.50 inch x 6.00 inch x 16 inch tires. Replaces AR52506. For the following: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2250, 2355, 2355N, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N, 2950, 2955, 3030, 3040, 3050, 3120, 3130, 3140, 3350, 840, 940. (Item #: 103756, Ref: 8N1015D)$56.00
Front Wheel Bearing Kit - Front Wheel Bearing Kit. Kit contains one each: LM48510 (Cup), LM48548 (Cone), M12610 (Cup), M12649 (Cone), AT10344 (Seal). For tractor models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T2580 For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830. Repairs one wheel. (Item #: 102228, Ref: FW155S)$28.40
No Picture
Front Wheel Bearing Kit - Wheel bearing kit. Contains one each: LM48510 (Cup), LM48548 (Cone), M12610 (Cup), M12649 (Cone), AR49592 (Seal). For tractor models 820 Mannheim serial number 042925 and up, 830 Mannheim with R47076 hub, 2040, 2240. For 2040, 2240, 820, 830. Repairs one wheel. (Item #: 102228, Ref: FW160S)$28.40
No Picture
Front Wheel Hub Cap, Used - For John Deere tractor models 820 (s/n 042925-later), 830 (non-utility), 920 (s/n 042925-later), 940, 1020 (s/n 042925-later), 1030 (with standard front axle), 1040, 1120 (s/n 042925-later), 1130 (with standard front axle), 1140, 1630 (with standard front axle), 1640 (low type), 2020 (s/n 042925-later), 2040 (s/n 350000-later), 2120 (s/n 042925-later), 2150 (Non-General Purpose), 2155, 2240, 2255, 2350 (low type), 2355 (with standard front axle), 2355N, 2550 (low type), 2555 (with standard front axle), 2755 (with standard front axle), 2855N (with standard front axle), Replaces John Deere OEM number T12688, 6 bolt hub cap, Press in style, For a new version of this item use Item #: 100685, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435275)$2.91
Rear Cast Wheel Pinion Gear Shaft, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 1020, 1030, 1120, 1130, 1520, 1530, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2840, 2850, 2950, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 3150, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7405, 7520, 8430, 8440, 8450, 8640, 8650, Replaces John Deere OEM nos A4380R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430283)$21.01
Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 19H1863. (Item #: 184824, Ref: 350719KIT)$22.00
Wheel 12X28 - Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For tractors: 1010, 1020, 1450, 1520, 1530, 1650, 2010, 2020, 2030, 2040, 2240, 2440, 420, 430, 435, 440 and others using 12 inches x 28 inches 4 rail spin out rims. Replaces: AL60764, AM3202T. Additional $25 due to weight. (Item #: 103722, Ref: 1687615M91)$495.00
Wheel Bearing Kit - For 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2040, 2120, 2150, 2155, 2240, 2250, 820, 830, 940, 2350 Lowprofile, (2344, 2555, 2755 all mid-hi axle), 2255 swept back. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548 (Cone), LM48510 (Cup), M12649 (Cone), M12610 (Cup), 23342 (Seal has 2.361 I.D.). (Item #: 102227, Ref: WBKJD2)$20.60
Wheel Bearing Kit - For 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830, (2440 SN# up to 340999). Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548 (Cone), LM48510 (Cup), M12649 (Cone), M12610 (Cup), AT10344 (Seal has 1/075 I.D.). (Item #: 102228, Ref: WBKJD3)$28.40
Wheel Clamp, Used - For John Deere tractor models 1530, 1630, 1640, 2030, 2040, 2040S, 2130, 2140, 2240, 2350, 2355, 2550, 2555, 2750, 2755, 2840, 2940, 2950, 2955, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 5500, 5510, 5615, 5715, 6110, 6200, 6210, 6300, 6310, 6400, 6405, 6410, 6415, 6505, 6615, 7505, 7515, Replaces John Deere OEM nos L38141, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431086)$12.26
Wheel Half Sleeve - Keyed Half, Used - For John Deere tractor models 50, 520, 530, 1020, 1120, 1520, 1530, 1630, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 4030, Replaces John Deere OEM number B3018R, Keyed Half, Pinion Half Sleeve use Item #: 499427, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499428)$70.01
Wheel Half Sleeve - Pinion Half, Used - For John Deere tractor models 50, 520, 530, 1020, 1120, 1520, 1530, 1630, 1640, 1830, 1840, 2010, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 4030, Replaces John Deere OEM number B3016R, Pinion Half, Half Sleeve, Keyed use Item #: 499428, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499427)$35.01
Wheel Hub, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2150, 2155, 2240, 2250, 2255, 2350 (low profile), 2355 (mid-high axle), 2355N, 2550, 2555 (mid-high axle), 2755 (mid-hi axle), Replaces John Deere OEM number R47076, 6 bolt hub, For a new version of this item use Item #: 102233, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 402233)$45.01
Universal Parts and Accessories Category: Accessories / Supplies
Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127)$365.01
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153)$100.55
Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697)$7.70
2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696)$7.70
No Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186)$22.90
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187)$15.10
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185)$42.00
Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y)$24.40
Electrical System
NOTE
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.
NOTE
No Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE)$84.00
Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209)$13.10
Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302)$25.20
No Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010)$53.00
Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501)$57.00
Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6)$24.70
No Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85)$5.50
Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425)$4.50
NOTE
Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE
Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6)$15.80
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12)$15.80
Engine Gaskets
Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR)$10.60
Engine Parts
NOTE
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE
Engine Rings
NOTE
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE
Exhaust System
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C)$76.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C)$103.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C)$123.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR)$106.00
Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR)$167.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C)$147.00
Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C)$170.00
Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR)$89.00
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114)$3.20
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134)$4.80
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138)$2.70
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214)$4.58
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234)$8.71
Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300)$7.30
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312)$8.90
Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400)$8.70
Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500)$14.30
Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799)$10.10
Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800)$9.00
Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802)$11.10
Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804)$11.40
Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807)$11.00
Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14)$14.30
Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15)$18.38
Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A)$6.80
Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A)$7.40
Fuel System / Air Intake
Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553)$5.00
Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949)$9.92
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R)$3.90
Gauges
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771)$59.00
Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672)$41.00
Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095)$14.90
Hitch / Drawbar
Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X)$11.50
Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2)$37.00
Hydraulic System
Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021)$15.20
Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12)$11.00
Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180)$55.50
Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24)$13.50
Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30)$16.10
Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48)$16.50
Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000)$15.90
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60)$15.90
Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317)$15.50
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269)$242.80
Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215)$123.00
Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH)$39.00
Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311)$50.00
Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH)$53.00
No Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP)$21.50
Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236)$379.00
Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B)$245.00
Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195)$118.70
Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250)$24.00
No Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_)$8.50
No Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP)$8.50
No Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL)$69.00
No Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT)$29.50
No Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL)$56.00
No Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT)$23.60
No Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP)$8.50
No Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT)$22.50
No Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP)$8.30
No Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL)$76.00
No Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT)$29.50
No Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP)$9.80
No Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL)$110.00
No Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT)$42.00
No Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP)$10.40
No Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL)$59.00
No Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT)$23.30
No Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP)$7.60
No Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL)$62.00
No Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT)$23.50
No Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT)$18.20
No Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP)$7.90
No Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL)$84.67
No Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL)$68.39
No Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT)$99.22
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
PTO / Driveline
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY)$235.42
Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33)$339.00
PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164)$282.00
Seats
Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V)$1518.86
Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056)$2161.57
Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602)$52.00
Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014)$46.00
Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016)$53.00
Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP)$100.00
Sheet Metal / Body Parts
Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140)$41.19
Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759)$9.50
Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K)$178.00
Steering
Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003)$410.00
Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A)$13.30
Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417)$49.00
Tools
No Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891)$24.30
Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166)$100.00
Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166)$70.00
Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB)$17.15
Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R)$47.00
Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16)$112.00
Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050)$17.50
No Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059)$56.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058)$63.00
No Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061)$111.00
No Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062)$66.00
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
YESTERDAY's TRACTORS
has been a leading tractor parts supplier on
the internet since 1995. Join thousands of happy customers
who have purchased parts and more for their antique tractor from us!
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
