TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Ford 9N, 2N & 8N Discussion Forum

Progress!

[Show Entire Topic]

Welcome Guest, Log in or Register

Author

Alan R

04-01-2006 13:00:53

Report to Moderator

Well I finished my other chores in time to allow a few hours of work on the 8N and after many rounds of soaking, hammering, etc., I finally got the number one piston to move a little. After that, I couldn't stop until I had them all moving. Didn't actually remove them yet since I'm out of time for today, but am ready to finish the removal tomorrow. The wood chip in one eye, and the ATF in the other eye helped finish me up for the day. Also spent a little too much time getting pieces of wood wedged between the piston and crank. Don't know if the ATF soak and burn did the trick, or just getting a bigger hammer, but thanks to everyone for the suggestions/encouragement. I'll let you know what I find when the pistons are out.

[Log in to Reply] [No Email]

[Show Entire Topic] [Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy