Re: Re: 350 drawbar vs. 3 point

Posted by Mike s on March 31, 2001 at 04:05:24 from (209.193.68.5):

In Reply to: Re: 350 drawbar vs. 3 point posted by JohnIH on March 30, 2001 at 04:53:16:

i to have a 350 and my draw bar just slides in and out of my lift arms to use the 3 point i just slide out the draw bar and put in the lift arms when i would pull a baler or stack wagon it did have alot of sway so i built stablisers that bolt to the lift arms and up to the axle where the fenders would bolt if i had any. this also frees up my hyd lines for lifting the three point so it makes my 350 have 2 remotes wich is good when i use my rock picker hope this helps

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: 350 drawbar vs. 3 point Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]