Re: Re: Re: Removing M clutch shaft?

Posted by Haas on April 22, 2001 at 19:28:56 from (129.37.117.165):

In Reply to: Re: Re: Removing M clutch shaft? posted by Lowell Davis on April 22, 2001 at 16:45:17:

Well, next step is to take the fork loose from the cross shaft. Then pull out the cross shaft. Mine came out pretty easy. The fork is keyed to the cross shaft with 4 heavy washers that fit in half moon cutouts in the cross shaft. The washers are on the bolts that clamp the fork to the cross shaft. My experience, you have to tilt the shaft. It will not come out pulling straight back. Not enought room. If I were you I'd bolt the clutch back to the flywheel(at least loosely) before trying to tilt the shaft and take it out. That is unless you want to pull the clutch. It's a chore to get the clutch back up in there!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Removing M clutch shaft? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]