Re: CUB PTO disengages under load

Posted by David B on July 09, 2001 at 16:07:51 from (64.218.90.149):

In Reply to: CUB PTO disengages under load posted by Glen R. Davis on July 06, 2001 at 18:47:49:

I had a problem like this when I first took over my Dad's old '58 Cub. The bearing was shot in the power take off, it was so bad the pulley wouldn't stay on the shaft and some dumb shade tree mechanic tack welded it to the shaft. I had to replace the shaft, bearing, and pulley, and since it had been operated so long like that the shaft from the transmission was worn too. I had to machine a bushing out of bronze, similar to the pilot bushing in a crankshaft to take out the slack so it was easier to engage. It's been working for about 5 years now with no problem.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: CUB PTO disengages under load Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]