Re: M Sleeve Will Not Budge

Posted by Dan on July 13, 2001 at 18:58:37 from (12.18.162.253):

In Reply to: M Sleeve Will Not Budge posted by John on July 13, 2001 at 16:15:38:

you might try putting pressure on the top with rod and tap on the bottom of the plate with a piece of hardwood and a hammer. They are dry sleeves and not supposed to come out that hard. On my smta I had a stuck piston so the sleeve came out with the piston, on other one I used a puller like you describe and used a piece of an old mall handle, hitting it with a hammer to help move the piston. have heard people mention welding inside the liner also.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M Sleeve Will Not Budge Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]