Re: M Sleeve Will Not Budge

Posted by The Red on July 14, 2001 at 14:08:44 from (12.75.196.103):

In Reply to: M Sleeve Will Not Budge posted by John on July 13, 2001 at 16:15:38:

I had problems getting the #3 sleeve out of a 1951 H project of two years ago. I had 125 footpounds on the puller and I pounded at the bottom of the puller with a pipe and sledge hammer. It took an hour to get it up the first inch. I just kept the pressure on the puller and the vibrations from the pounding did the trick. It took 2 hours to get it out.

As mentioned, take a pick and make a groove around the outer sleeve edge and the cylinder wall. Keep it full of PB blaster. That worked well with Old Rusty H.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M Sleeve Will Not Budge Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]