Re: Farmall 560 gas hydraulics

Posted by Stan on August 22, 2001 at 05:43:13 from (209.222.118.214):

In Reply to: Farmall 560 gas hydraulics posted by Harold Walls on August 21, 2001 at 14:34:28:

I had this same problem with my 460. I believe they have the same setup with a TeleDepth control. The problem turned out to be in the TeleDepth control. If you take the front cover of the valve assembly (the one on the left) you will find 3 bevel gears that control the depth of the hitch. On mine the gear on the right had the roll pin come out so it was spinning on the shaft and not activating the valve. These gears have to be timed. The service manual doesn't give you much in the way of timing them. It was a trial and error thing to get them timed so it wouldn't either go all the way up or all the down. I spent the better part of a Sunday afternoon playing with mine. Good Luck.
Stan

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 560 gas hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]