Re: Questions on M hydraulics

Posted by Denny Frisk on September 27, 2001 at 16:15:41 from (12.4.181.2):

In Reply to: Questions on M hydraulics posted by Lowell Davis on September 27, 2001 at 13:32:45:

Dad's got the exact same set-up on His '51 M. You need a double acting cylinder to run the disc. This setup gives You live 2-way hyd. The little Gresen spool valve changes the 2-way to 1-way hyd. I would think there is also a add-on hyd. control valve the hyd. control lever goes to. The belly pump is just used to store oil now, no pump or control valve inside it any more. Hook the cyl. hoses up to the quick connects and switch the position of the Gresen valve and You should be in business. Also check the oil level in the res.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Questions on M hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]