Re: M Fender mounting hole depth?

Posted by john d on December 16, 2001 at 20:38:59 from (152.163.204.82):

In Reply to: M Fender mounting hole depth? posted by Zim on December 16, 2001 at 15:11:40:

If you ever have the occasion to pull that axle housing, you will likely find a little chunck of cast iron broken off and rattling around in the open space below the axle. Those holes are blind, and when someone puts in a bolt that's too long and keeps twisting it in until it bottoms in the hole, it will break out the casting underneath. Clean out the threads, put in a bolt to plug it, and don't worry too much about it. It takes more adversity than that problem to cripple an M!

Follow Ups:

• Re: Re: M Fender mounting hole depth? Zim 20:49:24 12/16/01 (1)
  • Re: Re: Re: M Fender mounting hole depth? john d 20:53:49 12/16/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: M Fender mounting hole depth? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]