Re: Decal confusion

Posted by Roger Mills on March 16, 2007 at 17:01:54 from (71.213.68.215):

In Reply to: Re: Decal confusion posted by Harold H on March 16, 2007 at 15:57:17:

Thats obvious by the number of replies to this post. According to my brochures the first A's had a non adjustable wide front and that was standard equipment, later a round beam adjustable front was optional and standard on the FAV. Then at about the time the IA came out with the square beam adjustable it was also optional on the A as well and was referred to as the 'heavy duty' version and later the round one was dropped. From what I have learned, mostly here, is that the round beam adjustable was installed on very few FAA tractors. One of the brochures shows a picture of the round one and talks it up pretty good. Thanks much for your help in sorting some of this out.

Replies:

• Re: Decal confusion Harold H 19:05:10 03/16/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]