Re: Clutch not Disengaging

Posted by Andrew Z on March 18, 2007 at 13:41:10 from (24.181.190.91):

In Reply to: Clutch not Disengaging posted by LinemanFarmer on March 18, 2007 at 06:15:59:

I had this happen (same symtoms anyway) turns out one of the forks on the pressure plate turned in and soo when I hit the pedal I only was able to push in 2 of the forks not hitting the third one at all.

I was about to pull the clutch. and then found this and it was it.. i dont know its not the first thing I though of and aperatly its not common but look to see if all the forks are at the same distance and that the throw out bearing hits them.

Andrew

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]