Re: SMD pump? Still runs full thottle when switche

Posted by Janicholson on March 28, 2007 at 09:51:04 from (199.17.6.122):

In Reply to: Re: SMD pump? Still runs full thottle when switche posted by Steve Sawyer on March 28, 2007 at 00:10:49:

When I was in the first efforts to get my MD to run on Diesel, the pump was stuck with the plunger up (not pumping) your plunger operates, but is not being rotated by the rack. Either the rack is stuck, or the govrenor is stuck. Mine was varnished (old oil residue and evaporated diesel) tight. I found no problems taking the entire device apart (with a diagram and clean cloth on a workbench). Nothing was forced, and using naptha as a solvent, it sclened up and ran just fine. JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]