Re: IH (Super C) disc brakes?

Posted by Andrew Z on April 01, 2007 at 16:54:38 from (76.200.215.184):

In Reply to: IH (Super C) disc brakes? posted by tractorsam on April 01, 2007 at 16:43:56:

I would get an I&T manual first. but yes you can replace the oil seals from the outside while you service the breaks. As for the locking up, I'v had experence with this on ouir Super C, and Super H. and first make suyre the breaks and all barks are really clean and free of dust and dirt. Also check the breaking serfaces for marks and ridges and deep scratches. Finaly if that does not work, first replace the break disks then replace the balls in the accuator and the springs too that is what solved the problem on our Super H. THe Super C just needed a good cleaning and it was all set.

Good Luck

Andrew

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]