Re: NOW WHAT? SEAL LEAKS.

Posted by georgeky on April 13, 2007 at 05:23:10 from (152.163.100.197):

In Reply to: Re: NOW WHAT? SEAL LEAKS. posted by JFavor on April 13, 2007 at 01:06:15:

When I last had one apart 10 years ago I thought I had to remove the gear from that shaft before it would come out, maybe I am thinking about a different shaft on something else. You should be able to replace the seal. I believe that it has a leather seal on the pulley end of housing to seal the shaft. It will be in a groove cut in the end cap itself. The gear and bearings will have to be removed to replace seal. I don't remember if there is a nut and washer holding the gear on shaft or not. If not it may need to be pressed off and bearings to.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]