Re: Older style front H cast hubs

Posted by kfox on April 16, 2007 at 08:13:29 from (63.18.189.106):

In Reply to: Older style front H cast hubs posted by SKK-Big Red Fan on April 16, 2007 at 06:50:25:

I'm going through the same thing with a 41 H now. The wheels were run with the bolts loose and the outer edge of the hub, where the bolt holes are, have chunks of the casting broken off. The back of the hub where the bolt heads go are chipped out, so I dont know if the bolts will hold. I'll know more when I get them sand blasted. I'll try to get a pic when I get them cleaned up. I did know where some of the old non adjustable hubs were in a boneyard. May need to check on them again. ken

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]