Re: IH 404 Hydraulics - Again

Posted by the tractor vet on April 18, 2007 at 08:18:36 from (76.212.225.46):

In Reply to: IH 404 Hydraulics - Again posted by kentv on April 18, 2007 at 07:18:15:

Bob is correct you have a releif not working . You could send that new pump to lunch real fast or even get injured. Hyd . pressure is nothing to fool with . It can Kill. If ya don't have a gauge get one that is able to read TWICE what the system can handel and a hose that can handel the same . Also make sure that you have a book and read before ya do anything.That is why i use my flow rater when checking hyd. pressure as i can reg. the pressure as i go and if it startes to get to far over rated pressure i can control it and find why it is going over . . Now i know you can't go and lay out the mega. bucks for a flow rater but you can afford a good liquid gages that will read 5000 PSi.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]