Farmall & IHC Tractors Discussion Board |
Re: What Size Brush Hog For Super H?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on April 27, 2007 at 06:32:20 from (75.19.122.41):
In Reply to: What Size Brush Hog For Super H? posted by City-Boy McCoy on April 27, 2007 at 04:23:30:
I use to sell brush hog per say and for a super H in good condition just mowen pastrue a 7 footer would be no problem and go with the bigger gear box . also add the slip clutch shear bolts are a pain as the day will come when ya just have a weeee bit more to do and you will eat a shear bolt and will not have the correct bolt and since ya only have a weee bit to do this here old grade 8 will work till i can get to town and get some more shear bolts , and that my friend will be the day that ya find that old tree stump or that old hard rock that ya forgot about and pice of the gear box go flyen all over the place. Now if you do get a slip clutch always remember to back off the springs when ya put it way for the season and keep it covered the rest to help keep moisture out so it does not rust soild. Ya want a hog wide enough to get out past the tires and on a S/H always use and over running clutch on the PTO. Oh yea also make sure that it has a stump jumper . I use to sell the International Machinery line and in MHOP they were the best of the short line as they were built heavier and had a littel better product support.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|