Re: No spark

Posted by CNKS on May 16, 2007 at 19:12:29 from (204.249.178.32):

In Reply to: Re: No spark posted by the tractor vet on May 16, 2007 at 18:19:00:

Diagrams can be wrong. It shows the wire from the starter button to the S terminal on the solenoid, as you say. HOWEVER, it shows the wire from the opposite side of the starter button going thru the resistor to the + (non-points side) of the coil. The R terminal also attaches to the + side of the coil -- so this is wrong??As to the key switch, one terminal has the wire to the (-) ammeter terminal, which then goes from the (-) ammeter terminal to the Bat terminal on the regulator. The other ign switch terminal connects to the starter button. I have the thing wired according to the diagram, not saying this is correct. All wires are new, except those that did not come with the harness, even those are unused. There is no corrosion, anywhere.

Replies:

• Re: No spark The tractor vet 20:23:12 05/16/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]