Re: Farmall A Over Heating!!

Posted by gene bender on May 23, 2007 at 18:48:37 from (67.55.226.214):

In Reply to: Farmall A Over Heating!! posted by Jason1(Pa.) on May 23, 2007 at 18:31:58:

Remove the radiator then take off the lower housing and back flush the block. There are 4 holes that let the coolant down by the sleeves about the sixe of a nickle when you remove the lower housing you will be able to see in the block and you will get lots of crud by back flushing not uncommon for these blocks to be plugged after all they are only 50plus yrs old and we do have bad water. You mite get by by filling with vinegar after you drain the coolant out and letting it warm up and set for a while but you will find the bottom area of the water passage having crud an mite have some of the holes plugged

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]