Re: CNKS Can you help with axle seal replacement o

Posted by Superdave57 on May 24, 2007 at 17:28:18 from (75.88.83.116):

In Reply to: Re: CNKS Can you help with axle seal replacement o posted by Butch WI on May 24, 2007 at 10:47:23:

If you pull the hub off, the seal retainer should come off with four bolts removed and it is a simple matter to replace the seal, most bearing houses should have the seal. The o ring should be visible from there. It just slides over the end of the axle up against the bearing.

Good luck

db

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]