Re: Model 31 McCormick loader?

Posted by Brownie450 on May 26, 2007 at 04:55:17 from (207.177.82.228):

In Reply to: Model 31 McCormick loader? posted by W4 on May 23, 2007 at 22:01:41:

All you need is a 3/4 inch bolt & have a bushing made with 3/4 inch id, & outside dimension the same as the bucket hole-- I think ours is 1 1/4 or 1 1/2 inch. Use a thick flat washer on the inside under the bolt head. The original had a 3/4 inch fine thread on the outside & probably was grade 5 or 8. I can measure our bolt if you need dimensions.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]