|
Farmall & IHC Tractors Discussion Board |
Re: 1066, shifting issues again and now not starting
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on June 14, 2007 at 07:33:50 from (75.19.125.193):
In Reply to: 1066, shifting issues again and now not starting posted by Tim_in_IA on June 14, 2007 at 06:35:03:
Like Rusty said the shifter need some work along with some clutch and dump valve adjustment as this is one point that does not see the maintance that it should . As for your starting problems here a 1066 is a 12 volt system , now some one may have at one time added 2 twelve volt batterys when it should have two 6's . When one wants to jump start a 1066 pull the left battery cover and hook the pos. lead to the ft. post of the left battery and put the neg. lead to a good ground on the chassie , myself i use the head of the frame bolt . Also check your clutch safty switch it is under the floor plate on the left side and has linkage that hooks to the clutch pedal linkage.
Replies:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
