Re: rebuilding the shifting lever of an H

Posted by Nebraska Kirk on June 18, 2007 at 21:22:15 from (207.91.30.14):

In Reply to: rebuilding the shifting lever of an H posted by linemanFarmer on June 18, 2007 at 18:44:30:

It is a pretty straightforward job to remove and replace the water pump bearings. You do have to remove the water pump though, it makes it a lot eaiser to rebuild. You will have to remove the fan before you can remove the pump. You will have to replace the two seals in the pump too, as they have to be removed before the bearings can be removed. I would check with NAPA for the bearings and seals. When I rebuilt the water pump on one of my H's I checked with NAPA, bearings were $16 each and seals $5 each.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]