|
Farmall Tractors Discussion Board |
Re: Re: Hey Farmall folks. On the H and M flat belt pulley
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by the Red on June 18, 1999 at 09:48:56 from (206.246.187.2):
In Reply to: Re: Hey Farmall folks. On the H and M flat belt pulley posted by john on June 18, 1999 at 09:27:10:
That was definitely old 90W in that part of the pulley John. I went ahead and ordered a new inner and outer bearing from Bermuda Ken. $24 for the inside and $32 for the outside. Mine are intact but the balls are definitely rough. I did not remove the pulley assembly from the transmission. The oil seal itself was totally shot. This pulley had quite a few years of running on it.
Follow Ups:
Post a Followup
|
