Re: H Transmission cover removal

Posted by Michael Soldan on January 27, 2002 at 15:47:31 from (216.46.130.69):

In Reply to: H Transmission cover removal posted by BTD on January 27, 2002 at 14:45:17:

BTD, the following is taken from the blue ribbon service manual
1. Remove the clutch shaft
2. Remove two dowel pins and 6 cap screws to remove the belt pulley assembly
3. On an H the steering post and fuel tank support bracket need be unfastened and supported up off of the decking
4. Remove the seat assembly
6. The rear deckcover has 15 cap screws and three dowel pins
7. The brake housings must be removed by undoing 4 3\8" cap screws
8. The rear frame cover may now be removed complete with the gear shifter mechanism
That is the info given...hope it helps...good luck from Mike in Exeter Ontario

Follow Ups:

• Re: Re: H Transmission cover removal BTD 16:33:13 01/27/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: H Transmission cover removal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]