Re: Do to the torch I'm in the COLD

Posted by Steven@nd on February 07, 2002 at 18:12:18 from (12.23.185.194):

In Reply to: Do to the torch I'm in the COLD posted by Farmall-Nut on February 07, 2002 at 17:23:52:

Take a look at your engine block below the #1 spark plug. There should be a machined pad there with the serial number of the engine stamped in it. Those are usually close to the chassis serial number, sometimes exact. Casting codes will also get you within a year of production. On Farmall they read something like 10 17 L Here's the breakdown of the letters:
H- 1938
I- 39
J- 40
K- 41
L- 42
and on down the line. System started in 1931 with the letter A. In 1951 U and W were used, so 52 would be X. System reset with A in 1955. V was not used.

My 42 H has 101816 for both numbers.

Steven

Follow Ups:

• Re: Re: Do to the torch I'm in the COLD Farmall-Nut 18:30:48 02/07/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Do to the torch I'm in the COLD Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]