Re: MW clutch

Posted by Craig MO on April 19, 2002 at 20:12:18 from (216.139.97.173):

In Reply to: MW clutch posted by Scott Buckendahl on April 19, 2002 at 18:52:44:

This gives you live pto. You don't have to push clutch down to stop tractor, just pull hand clutch lever back. When lever is back and foot clutch pedal out your pto still turns. As far as adjusting take out one 5/16 bolt on cover and loosen the other one. Turn cover and you will see an adjusting nut. Bend lock tab up out of adjusting nut and turn in about 1/4 turn. Put cover back on and engage and disengage lever should take about 30 lbs. to do this and have a good snap. Repeat above process until you have it adjusted. Make sure you lock tab back down in adjudtig nut slot when done.

Follow Ups:

• Re: Re: MW clutch Dan Kelley 06:53:57 04/20/02 (1)
  • Re: Re: Re: MW clutch Steven@nd 10:38:48 04/20/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: MW clutch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]