1066 Steering Problem

Posted by Randal on April 20, 2002 at 20:05:28 from (204.252.74.37):

My 1066 won't steer when the engine is at low rpm's. It had been acting up for the better part of the last year. I took it to an IH mechanic that said the piroity valve in the multiple control valve was sticking and he rebuilt the MCV with a kit, it worked fine when I got it back and for about 3 months. now it is sticking again, to correct it you have to remove a plug on the side of the MCV and pull the plunger out dress it iup a little and put it back in. Then it works OK for a while and sticks again, Has anyone else had a similar kind of problem with these tractors and possibly a solution with out replacing the whole MCV. I am sure it would be similar on all the tractors that have the Multiple Control Valve.

Follow Ups:

• Re: 1066 Steering Problem Randal 20:00:39 04/21/02 (0)
• Re: 1066 Steering Problem Doug in Iowa 17:36:55 04/21/02 (0)
• Re: 1066 Steering Problem Pete1468 12:45:08 04/21/02 (1)
  • Re: Re: 1066 Steering Problem HD 14:32:31 04/21/02 (0)

Post A Followup Name: E-Mail: Subject: Re: 1066 Steering Problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]