IH 350 Utility Hydraulic questions

Posted by Bob Stratton on May 05, 2002 at 20:51:37 from (64.12.104.36):

I have a 350U with the fast hitch w/traction control with a hydraulic cylinder located at the right side (vertical) behind the seat. The problems i am having is lack of down pressure and slow raising on the implements.

I have a friend that has a 300U with the Hyd. Cyl located (horiz) on the left side of the seat and he can raise the rear wheels off the ground using a backblade. And he has quick response up/down.

I've checked the Hyd screen in the reservoir and it is clean. I understand I need a Hyd. Gauge to check the pressure in the system. I know some of the assy. such as the regulator saftey valve, check valve block or the pump itself could be bad . I do have power steering and it seems to be working normally.

If someone might have a suggestion please

thanks in advance

Follow Ups:

• Re: IH 350 Utility Hydraulic questions Harold Hubbard 04:55:23 05/06/02 (0)
• Re: IH 350 Utility Hydraulic questions joe 04:53:43 05/06/02 (0)

Post A Followup Name: E-Mail: Subject: Re: IH 350 Utility Hydraulic questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]