Re: Bull pinion/brake shaft

Posted by Mike ISW on May 17, 2002 at 04:11:23 from (64.12.104.162):

In Reply to: Bull pinion/brake shaft posted by Obie nh on May 17, 2002 at 02:28:04:

I just did what you descroibed to my '48 H. First of all don't try to remove those pinion housings yet. They wrap around the bull gears. The trans/diff cover needs to be removed and then you can remove bull gears. To get pinion housings out you'll see 2 threaded holes in each...use the retaining bolts in these holes to remove housings. I've heard guys on here remove bull gears from PTO opening without removing deck but you then don't get a good look at what else may be bad in trans/diff. re-post if more questions.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Bull pinion/brake shaft Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]