Re: Re: Re: Hyd Pump drive link--can't remove from H

Posted by Bob in SE Nebraska on June 04, 2002 at 10:44:45 from (162.40.71.48):

In Reply to: Re: Re: Hyd Pump drive link--can't remove from H posted by Dick Davis on June 04, 2002 at 04:11:24:

I recently replaced the seal for the belly pump drive shaft. (The drive shaft that brings power to the pump from the transmission) I had an easy time of removing the drive coupling as all I had to do is remove the pins and the coulping just fell out. I also replaced the seal that is above that seal which is where the power from the clutch enters the transmission. Both were easy to replace. For the top seal you need to take apart a coupling that is between the clutch and the transmission and the only thing to look for in that process is the fact that the bolts that hold together the coupling are tapered. As for part numbers, I just called Ken Updike and he knew what parts were needed and shipment was very quick.
Hope this helps. Bob

Follow Ups:

• Re: Re: Re: Re: Hyd Pump drive link--can't remove from H Dick Davis 04:56:10 06/05/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Hyd Pump drive link--can't remove from H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]