Farmall & IHC Tractors Discussion Board |
Farmall A motor locks up?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by bill on July 08, 2002 at 02:14:02 from (206.243.130.38):
Weird thing happened yesterday actually two things on my 42 Farmall A: 1. it chuggged and lugged while starting it and black smoke came out of the exhaust. it never did that before. then it took a couple seconds to get up to power and rpms. I leave the sediment bowl valve open. Could it have been flooded? or maybe the gas is not good or getting old. Plugs look fine. 2. when I drove it, and then parked it in my shed, i shut it down. then wanted to see if it would restart like it always has. so i tried cranking it and it was stuck. the motor was stuck. I tried the electric start and it wouldn't kick it over too. I put it in gear to rock it (3rd) and I couldn't budge it either. Maybe I should hae put it in first gear? Then I went back to the handcrank and it would not turn the motor over at all then, something unstuck, and I was able to turn the motor and crank it for a normal start. What's going on anybody have a clue? Bill
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|