|
Farmall & IHC Tractors Discussion Board |
Re: Farmall 100 Help
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Glenn(WV) on September 01, 2002 at 18:20:09 from (67.201.149.198):
In Reply to: Farmall 100 Help posted by jerry on September 01, 2002 at 17:34:54:
Are you using the right weight of oil? The manual calls for straight 30-weight. My 100 had some type of multigrade in it(my uncle had done the previous oil change) and it did exactly what yours is doing - it would go to about 25-28psi cold and drop to about 10psi hot(sometimes less). I replaced it with straight 30-weight and the pressure improved by 10psi cold and 7psi hot to 38 cold and 17 hot. As for the seat, what you have described is not original. The 100 came with a pan seat that was supported by two leaf springs. There was an optional "deluxe" seat with a seatback and armrests that slid on two rails for adjustment.
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
