Re: Timing 460D

Posted by Gatzz on October 09, 2002 at 17:04:31 from (12.64.228.27):

In Reply to: Timing 460D posted by David on October 08, 2002 at 20:56:15:

I also have a 460D that I restored. I think you will be ok to install the pump with the dots lined up but after you get it installed you will have to static time it. To do that get # 1 to come up on comp. and stop at 3 BTC. Now take off little timing window on the side of the pump and you should see 2 marks. Turn the pump until the marks line up with each other and tighten down pump. If you only see one mark you maybe 180 out. Also the back mark is stamped in and the forward one is usually a scribe mark. Someone correct me if this isn't right.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Timing 460D Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]