plow identity

Posted by Dan on November 10, 2002 at 19:38:38 from (12.104.68.200):

I bought a plow at an auction yesturday and am wondering what model it might be. It is definitely an IH as that is on it. It has a rectangular beam and is 2 bottom rollover. Looks like the beam is original in length and had no provision to add an extra bottom as some of the plows do. It is 16 inch but looks like you could adjust the trip standards for 14 inch. It has a tail wheel on each side(top and bottom) and the linkage on them was onece blue. It also has depth wheel that flops from side to side when plow is turned over, it has a 15 inch rubber tire. The plow is 3 point and uses a cylinder to roll it over by turning a sprocket with a large chain on it. Can you give me any ideas of model? Thanks

Follow Ups:

• Re: plow identity dick 01:52:35 11/12/02 (1)
  • Re: Re: plow identity Hugh MacKay 03:23:56 11/12/02 (0)
• Re: plow identity Hugh MacKay 13:33:42 11/11/02 (0)

Post A Followup Name: E-Mail: Subject: Re: plow identity Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]