Re: 706 Range Cover

Posted by the tractor vet on December 14, 2002 at 18:56:58 from (216.196.13.71):

In Reply to: 706 Range Cover posted by Duben on December 14, 2002 at 14:54:40:

If it has the old stile park lock that is the over center stile then no not realy but if it has been up dated then you must block it up, i use a half inch nut stood on end . It also helps to pull the cover off the side where rev. is as you will be bringing the reverse shift rod out with the cover and if it is like most 06searies the woodworthe key will fall out and the reverse shift fork will turn you will lose about a gal. of hy tran when this cover is pulled and it also helps if you have one extra pair of hands , place the range shifter in nuetral and when you go back togeather a flash lite helps to see under the cover as you go back down. This is the time to fix that sloopy rev. and rebush the top cover .

Follow Ups:

• Re: Re: 706 Range Cover Salvage Man 20:00:39 12/15/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 706 Range Cover Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]