Re: Re: Need help with i.d. of IH

Posted by Rob on December 23, 2002 at 18:51:07 from (65.138.131.234):

In Reply to: Re: Need help with i.d. of IH posted by Stan(VA). on December 18, 2002 at 05:22:22:

Thanks for the help! As far as I can tell, there is no IH tag on this beast; and I found that the aftermarket hydraulics on the 3-point were made by Nelson. It is a wide front end, engine in center, with 28" tires (rim size) bolted to the end of the axle. It has power steering with the steering box on top of the bell housing and the shaft going along the left (port) side just above the clutch pedal's height. If it makes a difference, it's got independent brakes for each side and a hole in the front below the radiator shell, for a starting crank maybe? The seat is aftermarket and unsprung.
Thanks! --Rob

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Need help with i.d. of IH Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]