Posted by IH fan on March 28, 2009 at 20:35:53 from (208.189.33.152):
In Reply to: 240U rear weights posted by IH fan on March 28, 2009 at 13:12:15:
Looks like you got in a little deep, Dave!! My seat looks the same as yours... better than the original. Mine has the exhaust out the hood and my headlights (unwired at present) are moved to the loader crossbar.
My wheels are 24" and Mark thinks his are for 24" and is checking. I had the part number from my parts book, but don't know if it's on the weights anywhere. 24" weights are 63# and 28s are 65#... a little lighter than I thought, but 252# should help. I could hang some weight on the rear blade, but that's not as clean. Guy I bought the tractor from had a big old piece of iron about 500# hanging with chains on the 3 point... now I see why.
This post was edited by IH fan at 20:37:36 03/28/09.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
