Re: Movement of drive sheave

Posted by Haas on January 21, 2003 at 04:10:43 from (166.72.245.36):

In Reply to: Movement of drive sheave posted by James Hotard on January 20, 2003 at 14:26:40:

those bolts on the drive sheave pull the wedge in to lock the sheave to the shaft. They need to be tight and the sheave should not move around on the shaft. Also, your belt needs to be as tight as you can get it to keep the belt running correctly. Never had a Cub, but used to run a Super A and a 140 with a Woods. You have to keep the belt very tight.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Movement of drive sheave Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]