Farmall & IHC Tractors Discussion Board |
Re: Governer on Super A.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ScottyNY on January 30, 2003 at 10:39:18 from (128.59.123.87):
In Reply to: Governer on Super A. posted by Brian on January 29, 2003 at 22:40:31:
Whoa, there! Don't be working TOO hard. If you've already got the crankcase bolted back onto the torque tube, you should be able to install the oil pump by just removing the pan. AS for the governor timing, look at your cam gear. I can't quite remember which side is which, but if the marks on the cam gear are under the groove, then it will be the mark on the governor gear that is in line with the tooth. Or . . . just the opposite, if the marks on the cam gear are centered on a tooth, then the marks on the governor gear that center on a groove are the correct ones. It's the marks that must line up, and they will only line up when the tooth on one side is in the groove on the other. Does that make sense? (reading back over, I'm not sure I've really cast any light, here, but I hope it helps!) Scotty
Follow Ups:
Home
| Forums
Today's Featured Article -
Antique Tractor Solvents - by Curtis Von Fange. Solvents play an important role in keeping our tractor clean and running efficiently. There are many different types that can be used for external and internal cleaning of the various tractor parts. Being aware of the different types of solvents will make any cleaning job go easier because one can select the correct cleaning agent for the task at hand. Let’s take a quick look at what is available and readily used in the solvent larder of our shop environment. The most universal solvent in
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|