Farmall & IHC Tractors Discussion Board |
Re: Real Question, Whats a 230 worth?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on January 30, 2003 at 19:18:18 from (207.178.96.211):
In Reply to: Real Question, Whats a 230 worth? posted by Farmman on January 30, 2003 at 11:23:43:
The pump just needs a seal -- probably a speedi sleeve also, the hole the shaft goes thru will have to be enlarged to accept one, if it is similar to the one on my C. Otherwise, since it runs, that is a good price. Remember you can't start it with the pump off unless you make a cover that fits the opening for the pump, or it will blow out engine oil. Or, you can simply reinstall the pump to get it home. Check and make sure it is indeed the pump that is off and not the reservoir (includes all the control mechanisms) as that is a different problem.
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|