Farmall & IHC Tractors Discussion Board |
Re: TA noise
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Aces on April 01, 2003 at 10:23:56 from (67.0.38.9):
In Reply to: TA noise posted by CityFarmer on April 01, 2003 at 09:54:02:
That butterfly as you call it is the dump valve to dump the TA pressure when you shaft gears so no you cannot hold it forward the tractor would be in TA with out lock up clutch. the noise could be the nut on the bottom shaft in the TA housing that shaft has a nut at the back of the TA housing that can come loose sometimes. If you drain the oil and remove the plate on bottom of the TA housing that the transmision brake is in you can check if the spacers on the bottom shaft are loose if so you will need to split the tractor to fix it. just one idea
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|